Charging Your Dermapore - Dermaflash DERMAPORE User Manual

CHARGING YOUR
DERMAPORE
We recommend you charge device before
each use. Remove DERMAPORE, stand and
USB charging cord from box.
Ensure device is powered off. Firmly insert
USB pin into charging socket on right-hand
side of device.
Connect USB power cable to PC or AC
adaptor powerbank. Will not charge if PC
is in hibernation mode.
*Note, power adaptor is not included. Only use a 5V
USB wall adapter (such as a mobile phone charger) to
charge device. If you do not own one, power adaptors
are available for purchase at dermaflash.com/shop
A full charge will provide approximately
30-40 minutes of usage. Disconnect USB
cord once charging is complete.
Light
Solid White Light
Solid Blue Light
Rapid, Flashing White Light
Pulsing White Light
No Light
6
OR
Battery Level + Function
Fully Charged, Power ON,
EXTRACT MODE
Power ON,
INFUSE MODE
Low Battery
Charging
Power OFF