Important Safety Instruction • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. • Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Only use attachments/accessories specified by the manufacturer. • Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. • Unplug this apparatus during lightning storms or when unused for long periods of time. • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Page 3
Warning! Safety Instructions • Ventilation - Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. - Do not install the product on a carpet or cushion. - Do not block or cover the product with cloth or other materials CAUTION while unit is plugged in. • Take care not to touch the ventilation openings. When watching RISK OF ELECTRIC SHOCK DO NOT OPEN the TV for a long period, the ventilation openings may become hot. • Protect the power cord from physical or mechanical abuse, such as CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE being twisted, kinked, pinched, closed in a door, or walked upon. COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO Pay particular attention to plugs, wall outlets, and the point where QUALIFIED SERVICE PERSONNEL. the cord exits the device. • Do not move the TV whilst the Power cord is plugged in. The symbol is intended to alert the user to the presence of • Do not use a damaged or loosely fitting power cord. uninsulated dangerous voltage within the product’s enclosure ...
Page 4
- If you smell smoke or other odors coming from the TV • Do not allow an impact shock, any objects to fall into the product, - When lightning storms or when unused for long periods of time. and do not drop anything onto the screen. Even the TV is turned off by remote control or button, AC power • Do not press strongly upon the panel with a hand or a sharp source is connected to the unit if not unplugged in. object such as a nail, pencil, or pen, or make a scratch on it. It may • Do not use high voltage electrical equipment near the TV (e.g., a cause damage to screen. • Cleaning bug zapper). This may result in product malfunction. - When cleaning, unplug the power cord and wipe gently with a • Do not attempt to modify this product in any way without written authorization from LG Electronics. Accidental fire or electric shock soft/dry cloth. Do not spray water or other liquids directly on the can occur. Contact your local customer service for service or repair. TV. Do not clean your TV with chemicals including glass cleaner, Unauthorized modification could void the user’s authority to any type of air freshener, insecticide, lubricants, wax (car, operate this product. industrial), abrasive, thinner, benzene, alcohol etc., which can • Use only an authorized attachments / accessories approved by damage the product and/or its panel. Otherwise, this may result LG Electronics. Otherwise, this may result in fire, electric shock, in electric shock or product damage. malfunction, or product damage. • Never disassemble the AC adapter or power cord. This may result in ...
Preparing Optional Extras • When the TV is turned on for the first time after being shipped Optional extras can be changed or modified for quality improvement from the factory, initialization of the TV may take approximately without any notification. Contact your dealer for buying these items. one minute. These devices work only with certain models. • Image shown may differ from your TV. The model name or design may be changed due to the manufacturer’s • Your TV’s OSD (On Screen Display) may differ slightly from that circumstances or policies. shown in this manual. • The available menus and options may differ from the input source Magic Remote Control or product model that you are using. • New features may be added to this TV in the future. (Depending upon model) • The device must be easily accessed to a location outlet near the AN-MR19BA access. Some devices are not made by turning on / off button, turning off the device and unplugging the power cord. Check whether your TV model supports Bluetooth in the Wireless • The items supplied with your product may vary depending upon Module Specification to verify whether it can be used with the Magic the model. Remote. • Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. • ...
Lifting and moving the TV • Avoid touching the screen at all times, as this may result in damage to the screen. • Do not place the product on the floor with its front facing down without padding. Failure to do so may result in When moving or lifting the TV, read the following to prevent the TV damage to the screen. from being scratched or damaged and for safe transportation regardless • When attaching the stand to the TV set, place the screen of its type and size. facing down on a cushioned table or flat surface to protect • It is recommended to move the TV in the box or packing material the screen from scratches. that the TV originally came in. • Before moving or lifting the TV, disconnect the power cord and all cables. Mounting on the Table • When holding the TV, the screen should face away from you to avoid damage. 1 Lift and tilt the TV into its upright position on a table. • Leave a minimum of 10 cm space from the wall for proper ventilation. • Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grille area. 10 cm (Depending upon model) • ...
Mounting to the Wall • Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.) • If you install the TV on a stand, you need to take actions An optional wall mount can be used with your LG Television. Consult to prevent the product from overturning. Otherwise, the with your local dealer for a wall mount that supports the VESA product may fall over, which may cause injury. standard used by your TV model. Carefully attach the wall mount • Do not use any unapproved items to ensure the safety and bracket at the rear of the TV. Install the wall mount bracket on a solid product life span. wall perpendicular to the floor. If you are attaching the TV to other • Any damage or injuries caused by using unapproved items building materials, please contact qualified personnel to install the are not covered by the warranty. wall mount. Detailed instructions will be included with the wall mount. • Make sure that the screws are fastened tightly. (If they We recommend that you use an LG brand wall mount. The LG wall are not fastened securely enough, the TV may tilt forward mount is easy to adjust or to connect the cables. When you do not use after being installed.) LG’s wall mount bracket, use a wall mount bracket where the device is • Do not fasten the screws with excessive force otherwise adequately secured to the wall with enough space to allow connectivity they may strip and become loose. to external devices. If you are using a non-adjustable mount, attach the mount to the wall. Attach the cables to the TV first, then attach the TV Securing TV to the Wall to the mount.
Page 8
Connections • When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, in order to prevent the influx of dust and insects. (Depending upon model) You can connect various external devices to the TV. For more information on external device’s connection, refer to the manual provided with each device. Antenna/Cable Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and an Stand hole RF cable is optional. • Make sure not to bend the copper wire of the RF cable. Copper wire • Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV. • To improve the picture quality in a poor signal area, purchase a signal amplifier. • Use a signal splitter to use 2 TVs or more. • If the antenna is not installed properly, contact your dealer for assistance. Other connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. HDMI • When connecting the HDMI cable, the product and external devices should be turned off and unplugged. • Supported HDMI Audio format : (Depending upon model) DTS (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz), DTS HD (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz / 192 kHz), Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz), PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)
Using Button External Devices Supported external devices are: Blu-ray player, HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, You can simply operate the TV functions, using the button. and other external devices. • If you record a TV program on a Blu-ray/DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the manual provided with the connected device. • The external device connections shown may differ slightly from illustrations in a manual. • Connect external devices to the TV regardless about the order of the TV port. • If you connect a gaming device to the TV, use the cable supplied with the gaming device. • Refer to the external equipment’s manual for operating instructions. • In PC mode, there may be noise associated with the resolution, Basic functions vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to Power On (Press) another rate or adjust the brightness and contrast on the [PICTURE] Power Off (Press and Hold) menu until the picture is clear. Menu Control (Press • Some USB Hubs may not work. If a USB device connected through Menu Selection (Press and Hold a USB Hub is not detected, connect it directly to the USB port on ...
Using Remote Control ** To use the button, press and hold for more than 1 second. (POWER) Turns the TV on or off. (Depending upon model) Returns to the last TV channel. The descriptions in this manual are based on the buttons on the remote (Search) Shows the search mode. control. Please read this manual carefully and use the TV correctly. Activates or deactivates the subtitles. (Q. Settings) Accesses the Quick Settings. To install batteries, open the battery cover, replace batteries (1.5 V AAA) (INPUT) Changes the input source. matching the and ends to the label inside the compartment, Number button Enters numbers. and close the battery cover. To remove the batteries, perform the Accesses the [QUICK HELP]. installation actions in reverse. This remote uses infrared light. When in (DASH) Inserts a between numbers such as 2-1 and 2-2. use, it should be pointed in the direction of the TV’s remote sensor. Accesses the saved channel list. (MORE ACTIONS) Displays more remote control functions.
Abnormal Display • Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak. • If the TV feels cold to the touch, there may be a small flicker when • Failure to match the correct polarities of the battery may it is turned on. This is normal; there is nothing wrong with TV. cause the battery to burst or leak, resulting in fire, personal Some minute dot defects may be visible on the screen, appearing injury, or ambient pollution. as tiny red, green, or blue spots. However, they have no adverse • This apparatus uses batteries. In your community there effect on the TV’s performance. Avoid touching the LCD screen or might be regulations that require you to dispose of these holding your finger(s) against it for long periods of time. Doing so batteries properly due to environmental considerations. may produce some temporary distortion effects on the screen. Please contact your local authorities for disposal or • This panel is an advanced product that contains millions of pixels. recycling information. In a very few cases, you could see fine dots on the screen while • Batteries inside or inside the product shall not be exposed you’re viewing the TV. Those dots are deactivated pixels and do not to excessive heat such as sunshine, fire or the like. affect the performance and reliability of the TV. • Displaying a still image for a prolonged period of time may cause an image sticking. Avoid displaying a fixed image on the TV screen for a extended length of time. User Guide Generated Sound • Cracking noise A cracking noise that occurs when watching or For more information about this TV, read the USER GUIDE embedded in ...
Specifications Product specifications may be changed without prior notice due to upgrade of product functions. (Depending upon country) Broadcasting Specifications For LM6300PS, LM630BPS, MODEL For LM630BPD, LM6300PD series LM620BPS, LM625BPS series Digital Analog Digital Analog Television system SBTVD NTSC, PAL-M/N DVB-T/T2 NTSC, PAL-M/N VHF 2 - 13 VHF 2 - 13 Program coverage UHF 14 - 69 UHF 14 - 69 (Band) DTV 2 - 69 DTV 2 - 69 CATV 1 - 135 CATV 1 - 125 External antenna 75 Ω impedance Wireless module (LGSBWAC92) Specifications Wireless LAN (IEEE 802.11a/b/g/n/ac)
Open Source Software Regulatory Notice Information WARNING! To obtain the source code under GPL, LGPL, MPL, and other open source Never place a television set in an unstable location. A television set may licenses, that is contained in this product, please visit fall, causing serious personal injury or death. Many injuries, particularly http://opensource.lge.com. to children, can be avoided by taking simple precautions such as: In addition to the source code, all referred license terms, warranty • Using cabinets or stands recommended by the manufacturer of the disclaimers and copyright notices are available for download. television set. LG Electronics will also provide open source code to you on CD-ROM • Only using furniture that can safely support the television set. for a charge covering the cost of performing such distribution (such • Ensuring the television set is not overhanging the edge of the as the cost of media, shipping, and handling) upon email request to supporting furniture. opensource@lge.com. • Not placing the television set on tall furniture (for example, This offer is valid for a period of three years after our last shipment of cupboards or bookcases) without anchoring both the furniture and this product. This offer is valid to anyone in receipt of this information. the television set to a suitable support. • Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture. Licenses • Educating children about the dangers of climbing on furniture to reach the television set or its controls.
Page 16
The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. Model Serial No.
Page 17
Connection / Sound Programmes Connection Add a Hidden Wireless Network General Connect via WPS PBC Safety Connect via WPS PIN Advanced Wi-Fi Settings Accessibility For wireless AP (Router) that have the symbol, www.lg.com you need to enter the security key.
Page 18
Troubleshooting Network Problems 1 Press the (Settings) on the remote to Check the AP (Router) or consult your Internet access the settings menu. Point the ( ) [All service provider. Settings] icon and select by pressing the Wheel (OK) button on the remote. When X appears next to Gateway: Unplug the power cord of the AP (Router) and All Settings...
Page 19
1 Check that Wi-Fi is enabled on your smartphone. To use SmartShare, both devices must on the same local network. 2 Install/run the app for sharing content on your smartphone (It's called LG TV Plus on LG phones). 3 Enable your smartphone to share content files with other devices.
Need help?
Do you have a question about the 32LM630BPDB and is the answer not in the manual?
Questions and answers