Page 1
To obtain the best results from your new camera, read these instructions carefully before use; retain the manual for future reference. Features • The camera can be supplied with either DC or AC power supply. • Automatic camera frequency synchronization to local mains, when AC powered. •...
Warnings Warning: To prevent fire or shock hazard, do not expose camera or monitor to rain or moisture. The lightning flash with arrowhead symbol, within a triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure;...
Servicing: Do not attempt to service this product yourself as removing covers expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Damage requiring service: Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the power supply cord or plug is damaged b) If liquid has been spilled or objects have fallen into the product...
Any unauthorized modification to this equipment could result in the revocation of the authorization to operate the equipment. Lenses The camera is provided with a standard CS-mount.Therefore, a wide range of lenses can be used. For example: • fixed iris lenses •...
Page 5
Terminals: positive (+) wire for DC, any supply wire for AC negative (-) wire for DC, other supply wire for AC mechanical ground (differential voltage between any supply wire and mechanical ground should be less then 50 V) For a NTSC camera use class 2 type of wiring and a power supply compliant with UL1492. For a PAL camera, use a power supply that meets the requirements for SELV circuit, according to EN 60065 or EN 60742 only.
V-phase adjustment (only functional when the camera is AC-powered) When more cameras are connected to different AC power groups and share the same monitor, video recorder, etc., AC phase differences may occur. If so, the video picture will be unsynchronized for a short period (rolling picture) each time you switch the monitor to another camera.
Technical specifications Medium resolution Type 0430/11 TV standard Imaging device Active pixels 512x582 512x492 752x582 768x492 512x582 512x492 752x582 768x492 (HxV) Lens mount Hor. resolution (TVL) Min. illumination Back light compensation Iris control CVBS output (75Ω) Y/C output (75Ω) White balance 12-28 V~(AC);...
Page 8
Fig. 1 Fig. 2 Fig. 3 IRIS DC 12V IRIS AC 24V IRIS LEVEL VIDEO IRIS AES OFF BLC OFF VIDEO OUT (Only for high resolution camera) IRIS IRIS LEVEL VIDEO AES OFF BLC OFF VIDEO OUT (Only for high resolution camera) Low Voltage Camera...
This manual is also suitable for:
Ltc0430/11Ltc0450/11Ltc0430/51Ltc0450/10Ltc0430/10Ltc0430/21...
Show all