Firmware Updates And Factory Restore - Fender Mustang GTX Series Owner's Manual

FIRMWARE UPDATES AND FACTORY RESTORE

As noted in the introduction, Mustang GTX users should check regularly for firmware updates that improve
and enhance the Mustang GTX experience. To perform a Mustang GTX firmware update, put the amp in WiFi
update mode by pressing and holding the ENCODER for five seconds (yellow arrow in illustration below) while
turning the amplifier on.
The DISPLAY WINDOW will then indicate that Mustang GTX is searching for the latest firmware update, fol-
lowed by indication that the firmware update is downloading (see illustrations below).
DOWNLOADING UPDATES...
SEARCHING FOR UPDATES...
When the download is complete, the DISPLAY WINDOW will then indicate that Mustang GTX is applying the
firmware update, followed by indication that the firmware update is complete and the amp should be restart-
ed (see illustrations below).
AMPLIFIER UPDATE COMPLETE
PLEASE RESTART YOUR AMP
APPLYING UPDATES...
60