DoorHan Arm-320 Installation And Operating Manual
  1. Manuals
  2. Brands
  3. DoorHan Manuals
  4. Door Opening System
  5. ARM 320
  6. Installation and operating manual

DoorHan Arm-320 Installation And Operating Manual

Operator
Hide thumbs Also See for Arm-320:
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATOR
ARm-320
Installation and Operating Manual
© DoorHan, 2014
GeneRAL InFORMAtIOn
sAFety InstRuCtIOns
OpeRAtOR unIt
InstALLAtIOn
eXtReMe pOsItIOn ADJustMent
eMeRGenCy ReLeAse OpeRAtIOn
MAIntenAnCe
tROuBLesHOOtInG
COntents
2
2
3
4
5
9
9
10
10

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Arm-320 and is the answer not in the manual?

Questions and answers

Related Manuals for DoorHan Arm-320

Summary of Contents for DoorHan Arm-320

  • Page 1 COntents GeneRAL InFORMAtIOn sAFety InstRuCtIOns OpeRAtOR unIt InstALLAtIOn eXtReMe pOsItIOn ADJustMent eMeRGenCy ReLeAse OpeRAtIOn MAIntenAnCe tROuBLesHOOtInG OPERATOR ARm-320 Installation and Operating Manual © DoorHan, 2014...

  • Page 2: Table Of Contents

    8. TROuBLESHOOTING ................................ 10 1. GENERAL INFORMATION The electromechanical arm type operator Arm-320 is designed for automation of a swinging double-leaf gate. The operator consists of a self-blocking gearmotor with protective cover and an articulated arm system which is mounted on a wall using necessary accessories.

  • Page 3: Technical Specifications

    Save these instructions. Follow all instructions since incorrect installation can lead to severe injury.  Arm-320 was designed for automation of street double-leaf swinging gate with a load-bearing structure. Do not use the  operator for other than intended purposes.

  • Page 4: Operator Unit

    Do not use the operator if it needs repair or adjustment as installation defects or unbalanced door can cause injury.  DoorHan shall not be held liable in case of improper installation of the item and damage arisen during operation. ...

  • Page 5: Installation

    Have a qualified technician lay the cables 230 V Ac. The cables must be laid in protective corrugated tubes. Avoid con- tact of cables and moving parts of the door. In case of supply cable damage, use the suitable type of the cable. Cables needed for installation of the Arm-320 operator and accessories (if available): cable 2 × 0.5 mm •...

  • Page 6: Operator Installation Variants

    InstALLAtIOn 4.3. OpERATOR INSTALLATION VARIANTS Installation on the column Installation on the column Installation on the leaf Outward opening Inward opening Inward opening 4.4. INSTALLATION DIMENSIONS Inward opening If dimension B is 0–300 mm, then dimension A should be more than 110 mm. If dimension B is 300–380 mm, then dimension A should be more than 150 mm. Outward opening Dimension A should be within the range of 100–300 mm.

  • Page 7: Mounting Base And Clamp A Installation

    InstALLAtIOn 4.5. MOUNTING BASE AND CLAMp A INSTALLATION Front view use ∅8 mm bolts and ∅14 mm anchors to fix the mounting base on the column. The mounting base should be placed at a distance of not less than 150 mm from the ground. Fix clamp A on the gate leaf (use ∅8 mm bolts or welding). clamp A should be placed at a distance of 450 mm from the hinge, horizontally, and 19 mm from the mounting base installed on the column, vertically (see the picture above).

  • Page 8: Straight And Curved Arms Installation

    eLeCtRICAL COnneCtIOns 4.7. STRAIGHT AND CURVED ARMS INSTALLATION Insert the straight arm in the driving shaft of the reducer. Level the ends of the shaft and the arm, fix the washer using screw M6×20 and fix the axis of the arm using 2 pairs of lock screws. connect two arms using screw M8×16 and washer.

  • Page 9: Extreme Position Adjustment

    eXtReMe pOsItIOn ADJustMent 5. EXTREME pOSITION ADJUSTMENT 1) unblock the reducer and open the gate leaf until the necessary position. 2) Turn the upper cam on the reducer shaft until actuation (disconnection) of micro- switch. close the leaf and fix the cam using a screw.

  • Page 10: Maintenance

    • After expiration of life time, the item shall be delivered in a specialized disposal point! • If you have lost this Manual, you may request for the duplicate copy to the following address: DoorHan s.r.o., Kralovsky vrch 2018, 432 01, Kadan, czech Republic, or by e mail: europe@doorhan.com.
  • Page 11 nOtes...
  • Page 12 We very much appreciate that you have chosen the product manufactured by our company and believe that you will be satisfied with its quality. For information on purchasing, distribution and servicing contact DoorHan central office at: Kralovsky VRcH 2018, Kadan, 43201, czech Republic Telephone: +420 474 319 111 E-mail: europe@doorhan.com...

Table of Contents