Page 1
MB Star C4 User Manual Steps for Installing Rechargeable batteries and WIFI Card 1. Please prepare the following tools: ①--- SDconnect multiplexer which need to input the batteries。 ②--- 6 units Ni-MH Rechargeable batteries,Size:AA, Voltage:1.2V, Capacity:above 1700mA。 ③--- 1 unit 108M WIFI Card。...
Page 2
2.2 Take out the rubber as below. ①--- Batteries Space. ②--- WIFI Card Space. ③--- SD Card Space. 3. Insert the Rechargeable batteries. 3.1 Use the T20 Plum screwdriver to take out the screws of Batteries Space fixation as below. 3.2 Take out the fixation of Batteries Space.
Page 3
3.3 Insert the batteries. Note the Battery polarity. 3.4 Button on the Fixation of Batteries Space after inputting the Rechargeable batteries. 3.5 Use the T20 Plum screwdriver to fix the screws of Batteries Space fixation as below. Inserting the batteries is finished. http://www.obd2be.com/...
Page 4
4. Installing WIFI Card. 4.1 Inserting the WIFI Card into the WIFI Card Space. Please make the correct direction. 4.2 Push it to make it totally connected. 4.3 Cover the rubber and fix the screws to finish all the work. http://www.obd2be.com/...
Need help?
Do you have a question about the Star C4 and is the answer not in the manual?
Questions and answers