Advertisement
Table of Contents
- 1 Contents in Box
- 2 Remove Plastic End Caps
- 3 Insert the Unit into Back of Keyboard Stand
- 4 Adjust Position of Arms Horizontally Using
- 5 Adjust the Angle of each Arm with
- 6 Adjust Depth of Arms Using Small Knob
- 7 Adjust Height of Arms Using Knob
- 8 Make Sure All Knobs Are Fully Tightened before
- Download this manual
Deluxe Keyboard Tier
KSA8500
Contents in box:
• Deluxe Keyboard Tier
• Z stand adapters
Deluxe Keyboard Tier
1. Remove plastic end caps from back of
keyboard stand, and adjust width of KSA8500 to
fit peg inserts into back of keyboard stand.
2. Insert KSA8500 into back of keyboard stand
and tighten round knobs behind the inserts to
secure KSA8500.
©2018 The Music People On-Stage.com
Z stand adapters
Note: If using a Z stand, remove plastic end
caps from Z stand. Drill hole in stand to secure
Z stand adapters with screw.
3. Adjust position of arms horizontally using
small cat's eye knobs on back and bottom of
lower arm brackets.
Advertisement
Table of Contents
Related Manuals for on stage Deluxe Keyboard Tier KSA8500
Summary of Contents for on stage Deluxe Keyboard Tier KSA8500
- Page 1 2. Insert KSA8500 into back of keyboard stand 3. Adjust position of arms horizontally using and tighten round knobs behind the inserts to small cat’s eye knobs on back and bottom of secure KSA8500. lower arm brackets. ©2018 The Music People On-Stage.com...
- Page 2 7. Make sure all knobs are fully tightened before placing any gear on the KSA8500. Finished adjustment. product should look like the figure below. Note: Outer arms can be moved to the inner portion of the stand if dissasembled ©2018 The Music People On-Stage.com...
Need help?
Do you have a question about the Deluxe Keyboard Tier KSA8500 and is the answer not in the manual?
Questions and answers