Attention; Environmental Conditions - Sanyo MIR-153 Instruction Manual

Downloaded from https://www.rsmanuals.com

ATTENTION

This unit is equipped with the circuit breaker on the
back. Please make sure this breaker is switched ON
bef ore the unit starts to run.
When the operation of the unit is stopped by this
breaker, please contact with dealer or the service sta-
tion after disconnecting the power supply plug.
CIRCUIT BREAKER
MIR-153
MIR-253

ENVIRONMENTAL CONDITIONS

This equipment is designed to be safe at least under
the following conditions:
- indoor use;
- altitude up to 2000 m;
- temperature 5°C to 40°C;
- maximum relative humidity 80% for temperatures
up to 31°C decreasing linearly to 50% relative
humidity at 40°C;
- mains supply voltage fluctuations not to exceed
±10% of the nominal voltage;
AWARNING
Never disassemble, repair, or modify the
unit. Such works by an ineligible person
may cause fire or injury by malfunction.
Disconnect the power supply plug when
there is something wrong with the unit.
Holding abnormal operation may cause
eleclric shock or fire.
^CAUTION
Connect the unit to power source having
the rated frequency and rated voltage in-
dicated on the rating label attached to the
unit. Use of other rating may cause fire or
electric shock.
- other supply voltage fluctuations as stated by the
manufacturer;
- transient overvoltages according to INSTALLA-
TION CATEGORIES (OVERVOLTAGE CAT-
EGORIES) II. For mains supply the minimum and
normal category is II;
- POLLUTION DEGREE 2 in accordance with IEC
664.
-17-
CIRCUIT BREAKER
MIR-553