Troubleshooting - Husqvarna BLi20 Operator's Manual

LED indicator
1 LED light flashes

TROUBLESHOOTING

Condition
The battery warning LED flashes.
The battery warning LED comes on.
TRANSPORTATION AND STORAGE
• The supplied Li-ion batteries obey the Dangerous Goods Legislation
requirements.
• Obey the special requirement on package and labels for commercial
transportations, also those from third parties and forwarding agents.
• Speak to a person with special training in dangerous material before
you send the product. Obey all applicable national regulations.
6
Battery status (state of charge)
BLi10, BLi20
The battery is 0% - 25% charged.
Possible faults
Temperature deviation, the battery is
too cold or too hot to use.
The battery is empty.
Permanent battery error.
BLi30
The battery is 0% - 5% charged.
Possible procedure
Let the battery cool down or move it indoors to warm it up. When the
battery has the correct temperature, it can be used again. Use the bat-
tery in ambient temperatures between -10 °C (14 °F) and 40 °C (104
°F).
Charge the battery.
Speak to your dealer.
• Use tape on the contacts when you put the battery in a package. Put
the battery in the package tightly to prevent damage and accidents.
• Do not keep the battery in an area where static electricity can occur. Do
not keep the battery in a metal box.
• Put the battery in a dry, frost free and clean space with correct
temperature.
• Put the battery in storage where the temperature is between 5 °C (41
°F) and 25 °C (77 °F). Keep the battery away from sunlight.
856 - 004 - 27.09.2019