Compressor Oil Chart - Doosan P250/HP210WKUB-EX-T2 Operation And Maintenance Manual

Lubrication

Compressor Oil Chart

Refer to this chart for the correct compressor oil required. Note that the selection of oil is
dependent on the rated operating pressure of the compressor and the ambient temperature
expected to be encountered before the next oil change.
Note: Oils listed as "preferred" are required for extended warranty.
Compressor oil carryover (oil consumption) may be greater with the use of alternative
oils.
Rated Operating
Pressure
100 psi to 300 psi
350 psi
Preferred Oil - Use of these oils with Doosan branded filters can extend airend warranty.
Refer to the warranty policy for details or contact your representative.
Preferred Oil
Pro-Tec™
XHP605
XHP1001
XHP405
Engine Oil
Ambient
Temperature
-10°F to 125°F
(-23°C to 52°C)
(-23°C to 52°C)
(-10°F to 125°F)
65°F to 125°F
(18C°C to 52°C)
1 gal. (3.8 5 gal. (19.0
Liter) Liter)
36899698 36899706
- 22252076
- 35612738
- 22252126
54480918 36875938
Operation & Maintenance Manual
Compressor Oil Specification
Preferred: PRO-TEC™
Alternate:
ISO Viscosity Grade 46 with rust and
oxidation inhibitors, for rotary screw
compressor service.
Preferred: PRO-TEC™
XHP605
Alternate:
XHP405
ISO Viscosity Grade 68 Group 3 or
5 with rust and oxidation inhibitors
designed for air compressor service.
Preferred:
XHP605
XHP1001
55 gal. (208
Liter)
36899714
22252050
35300516
22252100
36866903
220 gal. (836
Liter)
36899722
22252068
-
22252118
-
55