Sinusoidal Output Voltage; Square Wave Output Voltage - Philips PM 5101 Manual

6
2. Sinusoidal output volta ge
Distortion
<
1% over a supply voltage of 14 to 18 V, at
frequencies of 20 Hz - 100 kHz.
Amplitude O to 2 V
rms
(unIoaded)
Amplitude change due to a
change in the frequency at a
constant battery voltage
±
2%
Amplitude change due to a
change in the battery voltage
(14 to 18 V) at a constant
frequency
±
2%
Output impedance O to 250
n
(dependent on the position of the
amplitude control).
3. Square wave output vojtage
Amplitude
O to 4 V
p-p
when unloaded (superimposed on an
O to -2 V d.c. voltage). Continuously adjustable.
Amplitude cbange due to a
change in the frequency at a
constant battery voltage
±
0.5%
Amplitude change due to a
change in the batteryvoltage
(14 to 18V) at a constant fre ­
quency
<
10%