Page 1
E001D 2011/10 • 6910433 DE – Gebrauchs- und Montageanleitung Designheizkörper E001D EN – Instructions for installation and use, towel radiator E001D FR – Instructions d'utilisation et de montage des radiateurs design E001D IT – Istruzioni d'uso e di montaggio radiatori di design E001D...
Empfehlung gemäß Norm IEC 60335-2-43: ► DE – Gebrauchsanleitung DE – Montageanleitung Um jegliche Gefahr für Kleinkinder zu ver- meiden, Heizkörper so montieren, dass sich Der Heizkörper darf nur von einem Fachhand- Zulässiger Gebrauch das unterste Querrohr mindestens 600 mm werker montiert werden.
Page 3
Recommendation according to IEC stand- ► EN – Instruction manual EN – Installation instructions ard 60335-2-43: To prevent any risk to small children, install the radiator so that the bot- The radiator may only be installed by a special- Permissible use tommost cross tubes are situated at least ist.
Pour le fonctionnement électrique d'appoint : FR – Instructions d'utilisation FR – Instructions de montage Choisir la puissance calorifique du thermo- ► plongeur en fonction du type de radiateur Le montage du radiateur doit être exécuté par Utilisation conforme (voir la documentation commerciale ac- un installateur spécialisé.
In caso di integrazione elettrica: IT – Istruzioni per l'uso IT – Istruzioni di montaggio scegliere la potenza termica della barra ter- ► mica a seconda del tipo di radiatore (vedere Il radiatore può essere montato solo da un in- Uso consentito gli attuali documenti di vendita).
Page 6
DE – Maße und Gewichte EN – Dimensions and weights FR – Dimensions et poids IT – Quote e pesi Rückansicht • View from the rear Vue arrière • Vista posteriore 53–65 E (1/4") >50 VL (1/2") 70–82 RL (1/2") [mm] [mm] [mm]...
Page 7
DE – Montage EN – Installation FR – Montage IT – Montaggio Ø 6 Ø 10 180° 180° 2, 6, 12 Mindestabstände und Maße siehe ► Abb. A, Seite 6. ► For minimum spacing and dimensions, see Fig. A, Page 6. Ecarts minimaux et dimensions, voir ►...
Page 8
Ø 6 ► Heizkörper mit handelsüblichen Ver- schraubungen wasserseitig anschließen. 180° Heizkörper befüllen und entlüften. ► Verbrühungsgefahr! ► Heizkörper und Anschlüsse auf Dicht- heit prüfen. 180° Connect radiator with commercially ► available fittings upstream. ► Fill and vent the radiator. Risk of ►...
Need help?
Do you have a question about the BASIC 50 Series and is the answer not in the manual?
Questions and answers