Connecting The Camera To Your Pc; Selecting The Required Frequency - Philips DMVC300K/00 Instructions For Use Manual

Connecting the camera to your PC

1 Be sure to run the installation CD first, before connecting the camera to the PC.
2 Turn on the PC.
3 Connect the desktop stand to the PC:
• Connect the USB plug of the USB/Microphone cable to the USB port of the PC.
• Connect the 3.5 mm jack plug the USB/Microphone cable to the audio input of the PC.
4 Place the camera's USB connector on the USB connector in the desktop stand. Push it down
gently until it clicks into position.
> You will hear a beeping sound, the display lights up blue and the Charge LED lights up red.
> The camera turns on automatically and
> The camera will now derive its power from the PC.

Selecting the required frequency

Default frequency setting is
1 Press the Mode button until the currently selected frequency range appears on the
display: (Europe) or
2 Press the Shutter button if you wish to change the frequency.
> You will hear a beep.The frequency setting has now been changed.
appears on the display .
.
(U.S.A).
ENGLISH 15