Technical Data - Siemens FN2012-A1 Mounting & Installation

Technical data

9
9 Technical data
Supply
Ethernet interfaces
Connectors
Module connections
(optional)
Mechanical data
Ambient conditions
32 | 34
Building Technologies
Siemens Industry, Inc.
Operating voltage
Standby power consumption
Built-in power consumption, supply via
MoNetBus or AUX power
Power consumption via PoE
Sockets
Length of line
External supply input
Fault terminal
● Fault output 'F1', 'F2'
MoNetBus
External Ethernet connections 'P2', 'P3'
Circuits
Ethernet module (electric) VN2001
Ethernet module (MM) VN2002
Ethernet module (SM) VN2003
Dimensions (W x H x D), with cover,
without optional modules
Weight
For indoor use in dry rooms only
Operating temperature
Rel. humidity during operation
Protection category
The length is a guide value dependent upon the loss of the optical cable
1
DC 24 V
95 mA @24 V
Max. 380 mA @ 24 V
Max. 185 mA @ 24 V
4x RJ45, 10/100 Mbit/s
Max. 100 m via FC TP standard cable
4-pin plug-in terminal
4-pin plug-in terminal
Dry contact relay (common)
Switching current max. 1 A, resistive
Switching voltage max. DC 30 V
22-pin flat-cable connector
● Additional voltage surge protection
● Increased EMC protection
● Ground fault supervision
● All connections are power limited
● All connections – except local and
MoNet connections – are supervised
RJ45 connection (TP), cable length max.
330 ft/100 m
LC connector, multi-mode fiber optic
● Fiber length 62.5/125°µm:
13123 ft/4 km with an 11 dBm loss
● Fiber length 50/125°µm: 6561 ft/2 km
with a 7.5 dBm loss
1
LC connector, single-mode fiber optic:
● Fiber length 9/125°µm:
131233 ft/40 km with a 29 dBm loss
165 x 121 x 43 mm
560 g/1.2 lbs
120+/-3°F to 32+/-3°F
93+/-2% at a temperature of 90+/-3°F
IP30
1
1
A6V10407862_d_en_--
2018-09-07