Philips CT2888/OUABAAGB User Manual page 38

Call
To call a name in the

Call
three times.
In idle mode, you access directly the names list by moving - and call a name
selected in the list by pressing the ( key.
Flash dial
Instead of entering the names menu and scrolling in the list, you can link a
correspondent's name card to a hotkey, so that a long press on this key will directly
Flash dial
call him/her (e.g. long press on 2 to call your home or on 3 to call your

office).
You can only program keys 2 to 9, as keys 0 (selection of the
language) and 1 (voice mailbox) are predefined and cannot be changed.
To set a voice tag for voice dial, press , to enter the main menu, then select
1
Settings
Sselect a key from 2 to 9, and press ,.
2
3 Then select
Names
4 To flash dial a correspondent, press and hold the key you associated to his/her
name while in idle mode: the connection is established. Press ) to hang up.

Hotkeys can also be set from the
(see "Hotkeys" page 27). Hotkeys can be changed or deleted at any time.
Voice dial
As for the Flash dial feature, Voice dial allows you to quickly call a name in the list:
instead of programming a hotkey, you simply configure a voice command that will
Voice Dial
call the corresponding name when pronounced.
To set a voice tag for voice dial, press , to enter the main menu, then select
1
Names
2 Then select
When the option
instructions displayed on the screen. When prompted to record your voice
tag, make sure you are in a quiet environment, choose a short and simple word
and clearly pronounce it.
3 Back to the
36
list, simply select it, then press the ( key or press ,
Names
press ,.
> Hotkeys
in the carousel menu, press , and select a name in the
Flash dial
list. Pres , to confirm your choice.
> the name of your choice in the list and press , twice.
in the carousel menu, and press ,.
Voice dial
Add voice tag?
menu, press and hold e to go back to idle.
Voice dial
Names, calls
and messages
Names list. You can also set hotkeys for commands
appears, press ,, then follow the