Advertisement
Quick Links
Advertisement
Related Manuals for Bang & Olufsen BEOLINK PASSIVE
Summary of Contents for Bang & Olufsen BEOLINK PASSIVE
- Page 1 B E O L I N K ® P A S S I V E...
- Page 2 For the US-market only! NOTE: This equipment has been tested and CAUTION found to comply with the limits for a class B RISK OF ELECTRIC SHOCK digital device, pursuant to part 15 of the FCC DO NOT OPEN Rules. These limits are designed to provide reasonable protection against harmful inter- CAUTION: To reduce the risk of ference in a residential installation.
-
Page 3: Table Of Contents
↑ The main room The link room → This guide describes how to in- The link room is where you are Contents stall your BeoLink Passive kit in about to install your BeoLink 4 Placement a BeoLink (Master Link) distri- Passive kit. -
Page 4: Placement
P L A C E M E N T Planning your installation – The receiver cable supplied The BeoLink Passive kit consist is 5 metres (15'). If you need of these two main parts: a longer cable you must use –... - Page 5 Fixing the receiver to the wall 1 Use the wall bracket as a template, mark and drill the holes in the wall. 2 Use the two screws and wall plugs supplied (A), fasten the wall bracket. 3 When you have mounted the receiver cable (see page 6) place the receiver on the wall bracket and then secure it...
-
Page 6: Connections
BeoLink Passive receiver Use the cable supplied (or the optional special low capacity cable mentione on page 4) and connect the BeoLink Passive receiver as explained here: 1 Cut the cable to the required length (from the BeoLink Passive amplifier box to the receiver) and strip it as shown. - Page 7 In the link room: Connect the Connection Master Link cabel to the to the socket marked MASTER LINK main system on the BeoLink Passive amplifier box, and run the cable to the junction box. Main System Link System Inside the junction box: Join the cables as explained in the folder enclosed with the box.
-
Page 8: Ready For Use
Once connected to the mains other options). the BeoLink Passive is in stand- Option 4: To be used if you in- Indicator by mode, as indicated by a tiny stall the BeoLink Passive in red light on the front. -
Page 9: Maintenance
The cooling grill on the front of the amplifier box may be cleaned using a soft brush and a vacuum cleaner. Never use alcohol or other solvents to clean any parts of your BeoLink Passive! -
Page 10: International Guarantee
I N T E R N A T I O N A L G U A R A N T E E This Bang&Olufsen product If you intend to use the product in a country other than that in carries a guarantee against defects in workmanship and which it was bought, it may be materials.
Need help?
Do you have a question about the BEOLINK PASSIVE and is the answer not in the manual?
Questions and answers