Table of Contents
Advertisement
Quick Links
Paderno World Cuisine Spiralizer Pro, 7-Blade, 8-Cut
For safety and ease of use, read instructions thoroughly and carefully before the first use. Be sure to become
familiar with each component and always handle blades with caution as they are extremely sharp.
For questions or concerns, please contact Customer Service at (877) 778-2711.
For recipes visit:
www.padernoUSA.com
Advertisement
Table of Contents
Related Manuals for Paderno World Cuisine Spiralizer Pro
Summary of Contents for Paderno World Cuisine Spiralizer Pro
- Page 1 Paderno World Cuisine Spiralizer Pro, 7-Blade, 8-Cut For safety and ease of use, read instructions thoroughly and carefully before the first use. Be sure to become familiar with each component and always handle blades with caution as they are extremely sharp.
- Page 2 Overview The slicer comes with seven blades and a metal pin, which is snapped into the bottom of the L-shaped Slider Unit. The blades are: 2.5mm Straight Blade, 4mm Straight Blade, • 2mm Angel Hair Blade, 3mm Shredder Blade, 10mm Chipper Blade, 6mm Chipper Blade and a 1.5mm Wavy Blade. To make continuous spiral cuts and curly fries, attach the vegetable or fruit to the circular corer on the blade and gently press the prongs into the opposite end.
- Page 3 Components Replacement parts for the 7-Blade, 8-Cut Spiralizer Pro can be found at ww.PadernoUSA.com. 1. A4982893 – Box of 3 New Styles (10mm Chipper Blade, 4mm Straight Blade, 1.5mm Wavy Blade) 2. A49828AS – 2.5mm Straight Blade 3. A49828A2 – 2mm Angel Hair Blade 4.
- Page 4 To Assemble and Use: Step 1. Remove the clear upper cover. This cover is also designed to be used as a food tray. Figure 1 Step 2. Remove the 6” pin from the bottom of the Slider with Prongs and put aside for later use. (The Slider with Prongs is an L-shaped piece that comes stored upside down.
- Page 5 Step 4. On the opposite side, just below the now exposed Slider Tray, push the lock-unlock button to the unlock position and remove the Slider Tray. Figure 4 Step 5. Grab the tip (only) of the face-down blade holder and lift out into an up-right position. Then take out the loose handle for later installation.
- Page 6 Step 7. Moisten Suction Feet slightly and place unit facing left or right on a clean, smooth, nonporous surface, such as stainless steel. Press each corner of the unit down to secure the feet in place. Select blade and insert sideways, in the direction of the arrow (the slicer comes with one blade in place, three blades in the bottom compartment and three additional blades in a separate storage box).
- Page 7 To Make Spiral Accordion Cuts: Step 1. Pierce food with metal pin, making sure to push it all the way through food item. Remove the pin. Step 2. Insert a wooden skewer (not included) through the back of the corer and into the piercing previously made with the metal pin into food.
- Page 8 To Disassemble and Wash: Gently pull the Turning Handle out of the Slider with Prongs. • Pull out Slider with Prongs to remove from the Slider Tray. • Pull out Slider Tray by first pushing the unlock/lock tab to the unlock position. •...
Need help?
Do you have a question about the World Cuisine Spiralizer Pro and is the answer not in the manual?
Questions and answers