FORD & DOONAN iZone 400 Operating Instructions Manual

Ducted system

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Operating Instructions

for your Ford & Doonan Ducted System

Table of Contents

Need help?

Do you have a question about the iZone 400 and is the answer not in the manual?

Questions and answers

Summary of Contents for FORD & DOONAN iZone 400

Page 1: Operating Instructions
Operating Instructions for your Ford & Doonan Ducted System...
Page 12 Installation, Configuration & User Manual iZone 400 to 435 Air Conditioning Control Systems Need this manual in a larger format? Download a copy www.izone.com.au Airstream Pty Ltd reserves the right to change or modify the design, speciﬁca ons, so ware, hardware, ﬁrmware or Apps at any me without prior wri en or oral no ce.
Page 13: System Initialisation
3.0 System initialisation All new or modified systems must be initialised prior to system configuration. To initialise the system press the reset button on any colour touch screen. The time to initialise the system will vary depending on the number of motors connected.
Page 14 3.1 During initialisation This screen will be displayed whenever the system is reset or when power is restored after a power failure. None of the previous settings or parameters are lost. Progress bar IZONE 425 ID: 000000215 Current system conﬁgura on CCTS V2.21 14 Zones System type...
Page 15 3.2 Changing the orientation and type of graphic Classic / Portrait Press “SeGngs” Press Modern if you want to change to “Modern” style of graphics. Press Landscape if you want to remain in “Classic" style Landscape but change to landscape format This image is an example only.
Page 16 3.3 Changing the orientation and type of graphic Modern / Portrait Press Classic Display if you want to change to “Classic” style of graphics. Press “SeGngs” Press Screen Configuration “Screen” Beep is on Classic Display Landscape Hide Lighting Unhide Retic This image is an example only.
Page 17: System Configuration
4.0 System configuration Only qualified iZone installers should configure the iZone System. Incorrect configuration could result in damage to your WARNING ! air conditioning unit and system. To configure your system click on the System Config icon on the home page. Enter the system password “wamfud”...
Page 18: Configuration Main Menu
4.1 Configuration main menu Touch here to edit the number of zones installed. Touch here to edit the number of variable Note: electronic constant zones required. No. of Zones Information on the Touch here to set up and conﬁgure each zone (see 4.2).
Page 19: Zone Setup
4.2 Zone set up Zone Setup Touch here to go to the home screen If the zone has been named its name Wireless Kitchen Indicates this zone is ﬁ ed with a will show here wireless sensor. Touch here to change.
Page 20 4.2 Zone set up (cont) Kitchen Manual Control Constant Open / Closed Indicates this zone has been conﬁgured Climate Control to be climate controlled via a Wireless Press here to view or make changes Sensor to the wireless sensor status and Wireless Sensor conﬁgura on This Touch Screen...
Page 21: Sensor Configuration
4.2.1 Sensor configuration Hold down the “Pairing Bu on” on the iZone Kitchen wireless device. (see 4.2.2). Then press here to pair the device to your iZone Indicates the status of the wireless system Pair wireless device signal strength from the sensor in this zone.
Page 22: Pairing And Configuring Izone Rf Sensors
4.2.2 Pairing and configuring iZone RF Sensors Remove front cover from sensor Note: To pair other devices such as an iZone bridge or repeater simply press the pairing buFon on the device and at the Set the zone selector switch to the correct same .me press the paring buFon on the zone number touch screen and wait for the update to...
Page 23: Sensor Calibration
4.2.3 Sensor Calibration Kitchen Re-calibrated temperature for this zone Current reading with calibra on oﬀset included Calibrate sensor (22.2) Down -0.2 Touch here to adjust the calibra on up by Touch here to adjust the calibra on +0.1 deg. C down by -0.1 deg.
Page 24: Isense Controller Configuration
4.2.4 iSense controller configuration Indicates the iSense has been ac vated on this controller. Press and hold the “iSense” bu on to enter the Occupancy Strategy conﬁgura on menu. Follow the prompts to select the most appropriate strategy for your room or use the Custom Setup op on to design your own strategy Press and hold the “Airﬂow”...
Page 25 4.3 AC unit configuration Select method of controlling the AC unit. Touch here to go to the home screen. • R/Air will control using the unit’s return AC Unit Setup air sensor. • Master will control the AC unit from the AC Unit Controlling Sensor colour touch screen or zone sensor that has been selected as the Master.
Page 26: Fan Auto Configuration
4.3.1 Fan auto configuration Fan Auto Config Touch here to enable Fan Auto control and Enable Fan Auto Control to proceed with Fan Auto set up Auto Fan Touch here to set the AC Unit capacity for this Capacities system. The capacity selec on will provide an approximate airﬂow capacity for the AC Unit.
Page 27 4.3.2 Fan auto zone area setup Fan Auto Config Touch here to set the kitchen area in Zone 1 Area (sqm) square meters Kitchen 10 Zone 2 Area (sqm) Living 33 Zone name Current area set for Zone 3 iZone Zone 3 Area (sqm) Inventive Intelligent...
Page 28: Master Slave Setup
4.3.3 Master Slave Setup AC Unit Setup Touch here to view the fault history for this AC unit. Unit Info Indicates a Panasonic AC unit module is connected to this system Panasonic System can be turned On and Oﬀ via the iZone controller and another Fault History non iZone controller connected to...
Page 29 4.4 System Options (Display, Taglines & Filter Maintenance) Select either Full System or Zone Only System Options Select if you want the AC units controlling temperature to Display be displayed Note: Full System Information on the Select if you want the LED on the wired sensors to be per- configuration screen manently on when the zone is in Auto mode.
Page 30 4.4 System Options (Locks & Non Standard Damper Motors) Note: System Options Information on the configuration screen Locks Touch here to set limits for set point adjustment may vary depending and to lock this seGng Temperature Adjustment which devices are connected to the Airflow Adjustment Touch here to lock airﬂow adjustment.
Page 31: Wifi Bridge Configuration
4.5 Wifi bridge configuration Touch here to go to the home screen. WiFi Bridge Config Displays the iZone system iden ﬁca on number ID: 123123123 Displays the Bridge IP address allocated by IP: 192.118.27.69 the DHCP MAC: 00:04:A5:G9:32:39 Displays iZone Ethernet controller MAC address AC Unit Control Touch here to go back and save the...
Page 32: Manual Ip Configuration
4.5.1 Manual IP Configuration Touch here to go to the home screen. WiFi Configuration IP Address Select either Auto or Manual Conﬁgura on. If manual is selected you will need to know Auto Configuration the IP, Subnet Mask, Default Gateway, Primary DNS Server and Secondary DNS Manual Configuration Server addresses if applicable.
Page 33 4.5.2 WiFi connection A grey symbol indicates the Bridge is connected to the iZone system but is not connected to the local A green symbol indicates the iZone computer network system is now connected to WiFi and ready to use...
Page 34 4.5.3 Smart Phone or Tablet - System Requirements Smartphone or Tablet respective store. You will need a smartphone or tablet. The following • • Apple—Apple App Store platforms are supported: Apple & Android. • Android—Google Play Store System Requirements • Login to the respective store. iOS SOFTWARE REQUIREMENTS •...
Page 35 4.5.4 Smart Phone or Tablet - Equipment Required and Configuration Equipment See 2.24 & 2.25 For details of equipment required and • wiring diagram. Configuration Power up the WiFi Bridge • Wait a few seconds. Press the home • button on the touch screen. Press the System Config button on the •...
Page 36 4.5.5 Smart Phone or Tablet configuration - Using your App Using your iZone App in your local WiFi area You can only have access to the system from outside • your local WiFi range after you have successfully Press the iZone button on your phone or tablet. •...
Page 37: Home Automation Integration
4.6 Home automation integration iZone systems can be integrated into any home automation system that has an Ethernet interface. The WiFi bridge is fitted with an Ethernet connection . For interface specifications please download a copy of Airstream’s Technical Catalogue at http://www.izone.com.au Your home automation integrator will need to write suitable code to control your AC system.
Page 38 4.7 iZone Naked 400 remote - Configuration 1. To pair the remote to the system . Press and hold the Note: pair bu on on the remote and at the same me press the pair bu on on the C225 module. Zone 1 will ﬂash blue Zone 1 will be set as the rapidly.
Page 39 4.8 iZone Naked 410 remote - Configuration Note: 1. To pair the remote to the system . Zone 1 will be set as the Press and hold the pair bu on on the default constant zone when remote and at the same me press the Auto configured.
Page 40 5.0 User manual (shown in Classic style) 5.1 iZone 400 & 405 home System date and me Home screen Press to ac vate a favourite To get back to the Home • mode or to conﬁgure a new screen at any time press.
Page 41 5.2 iZone 410 - 435 home screen System date and me. To get back to the Home • screen at any time press. Press to turn your system Press to change zone When entering names or • on or oﬀ. status (5.4).
Page 42 5.3 AC unit control Press here to increase the AC unit set point. (Not applicable if “AC Current AC unit set unit controlling sensor—Zones” point. op on selected. See 4.3). Press here to decrease the AC unit Press here to change set point (Not applicable if “AC unit the mode.
Page 43: Zone Control
5.4 Zone control Indicates this zone is Indicates Zone 1 is in climate currently in climate control mode Press here to control mode. change the Set point. (5.6). Auto Zone Name. Press to Indicates this zone is closed. edit zone name and Press here to open the zone.
Page 44 5.5 Edit zone names & settings Press to edit zone name. Current zone being edited. Press to edit current zone System zone number status. and display name. Current zone status. Press to change maximum Zone maximum and and minimum airﬂow set minimum air ﬂow set points.
Page 45: Adjusting Temperature Controlled Zones
5.6 Adjusting temperature controlled zones Indicates RF strength from sensor serving this zone is acceptable (only if RF sensor is installed.) Indicates ba ery in the sensor serving Indicates current this zone requires replacement. (only if zone being adjusted. RF sensor is installed) Press here to increase the current zone set point temperature.
Page 46: Zone Airflow Summary
5.7 Zone airflow summary Indicates current minimum air ﬂow seGng to this zone. Zone name. Indicates current maximum air ﬂow seGng to this zone. Press here to change the zone air ﬂow seGngs. Scroll up or down to see more zones. iZone Inventive Intelligent...
Page 47: Changing Zone Airflows
5.8 Changing zone airflows Please note: It is possible to lock the maximum and minimum airﬂow seGngs in the conﬁgura on menus. If you screen does not display as indicated here and you require to make changes to Indicates current zone airﬂows please contact your installer to ac vate your display.
Page 48 5.9 Favourites Press the favourite you would like and iZone will automa cally change all the zones seGngs for this favourite. Indicates this favourite has not been used. Press here to setup and edit favourites iZone Inventive Intelligent Intuitive...
Page 49: Assigning And Editing Favourites
5.10 Assigning and editing favourites Indicates current favourite Press here to change the being changed. name of this favourite. Zone names. Indicates what mode you want each zone to operate in when this favourite is used. Change each zone seGng to suit your requirements for this favourite.
Page 50 5.11 Schedules Indicates an automa c me schedule has been enabled for this favourite. Any of your favourites can be set to automa cally start at any me of your choosing. Press here to enable the me based schedule for favourite (PM Nap). Indicates no automa c me schedule has been enabled for this favourite.
Page 51: Setting And Editing A Schedule
5.12 Setting and editing a schedule Indicates current schedule that you are changing or seGng. Indicates the start me START-08:00 for this schedule. Indicates the days this STOP-17:30 schedule will apply. Press to stop the schedule running Indicates the stop me for on this day.
Page 52: Setting The Time
5.13 Setting the time Indicates the minutes are be changed. Current me. Current date. Press the le or right arrows to move to the value you want to change. You must press the enter bu on to save the changes you have made.
Page 53: Changing The Home Screen Colour
5.14 Changing the home screen colour Slide le / right to adjust the screen brightness. Slide le / right to adjust Slide le / right to adjust the the screen satura on. screen contrast. Press the colour you would like for your home screen. Fine adjustments to the shade, tone, hue can be made using the brightness,...
Page 54: Isense Controller
5.15 iSense controller Indicates system me Indicates zone name this unit is controlling Indicates zone setpoint temperature Indicates the iSense has been ac vated on this controller. Indicates the air temperature inside Indicates the maximum airﬂow set for this the supply air duct zone Indicates the current zone Press to Open this zone fully...
Page 55 5.16 iZone Naked 400 remote - User manual Press here to move up to the next zone or if pressed a er the air% bu on it will increase the maximum airﬂow % Press here to move down to the next zone or if pressed a er Flashing red indicates this zone is faulty the air% bu on it will decrease the maximum airﬂow % Solid green indicates this zone is currently...
Page 56 5.17 iZone Naked 410 remote - User Press here turn the system on or oﬀ. All connected zones will display red if the system is oﬀ. If the manual system is currently on all connected zones will display green. Press here to change the system mode. When pressed the system setpoint temperature and fan speed will also be Flashing red indicates this zone is faulty displayed...
Page 57: Warranty Registration
6.0 Warranty registration Your system is supplied with a standard 2 year warranty. To extend your warranty you are required to complete this warranty registration form and email, fax or post it to Airstream along with a copy of your invoice. For terms and conditions please see Airstream’s warranty policy at www.air-stream.com.au Full Name: Contact Phone number including area code: Email address :...
Page 58 6.1 Airstream product warranty policy This document sets out the warranties that are provided by Airstream Components WA Pty Product user manual downloaded from Website provided the Site is located in the Perth metropolitan area, send an (“Registration”). Airstream service technician to the Site to effect repairs to Ltd ACN 146 196 778 (“Airstream”) in relation to each Product.
Page 59: Further Assistance
7.0 Further assistance If you require warranty or maintenance on your air conditioning system or iZone system you should contact your installation company. If you want to add more zones or temperature control to any zone you should contact your installation company. If you require assistance from the manufacturer contact: Airstream Components 9 Geelong Court...

This manual is also suitable for:

Izone 405 Izone 425 Izone 435 Izone 410