Unregister; Country Selection; Reset Unit - Philips DCTG1500B/93 User Manual

If no base is found within a certain period,
will be displayed with an error
NO BASE
tone to indicate failed registration and the
handset returns to idle mode.
8.3

Unregister

m
1
Press
:
to
ADVANCED SET
<
, scroll
OK
<
and press
2
Enter the Master PIN when
prompted and
displayed on the screen. Press
<
to confirm.
OK
:
3
Scroll to select the handset
number to unregister and press
<
.
OK
• A validation tone is emitted to indicate
successful unregistration and the
screen returns to previous menu.
Note
If no action is taken on the handset within
15 seconds, the unregistration procedure
will be aborted and the handset returns
to idle mode.
To unregister a handset that does not
belong to your new phone range, you can
only use your new phone to unregister it.
8.4

Country selection

The availability of this menu is dependent
on your country. You can select another
country different from the one chosen
during WELCOME mode.
Note
Once the country is selected, the default
line settings for the selected country will
be applied to the phone automatically (e.g.
Recall time, Dial mode, Language, etc).
28
key in idle mode, scroll
and press
:
to
UNREGISTER
.
OK
is
CONFIRM?
m
1
Press
:
to
ADVANCED SET
<
, scroll
OK
<
and press
2
Enter the Master PIN when prompted
<
and press
Note
By default, the Master PIN is 0000.
:
3
Scroll to the country of your
choice and press
• A validation tone is emitted and the
screen returns to previous menu.
8.5

Reset unit

You can reset your phone to its default
settings with this feature.
!
Warning
Upon reset, all your personal settings, call
log and redial list entries will be deleted
and the phone will return to its default
settings. However, your phonebook will
remain unchanged after reset.
Note
You may have to configure your phone
once again. In this case the WELCOME
mode will appear again after master reset.
(see chapter 3.4)
m
1
Press
:
to
ADVANCED SET
<
, scroll
OK
<
press
OK
2
is displayed on the screen.
CONFIRM?
<
3
Press
OK
• A validation tone is emitted.
• The unit is reset to its default
settings. (see "Default settings" on
chapter 8.10)
key in idle mode, scroll
and press
:
to
COUNTRY
.
OK
to confirm.
OK
<
to confirm.
OK
key in idle mode, scroll
and press
:
to
RESET
.
again to confirm.
Advanced settings
and