Advertisement

The VirtuOx Total Solution
No cost software + low cost oximeters =
The industry's most cost effective way to qualify oxygen patients!
VPOD-H Product Features:
FDA Approved
Data storage and transmission to VirtuOx
Laboratory for Oxygen Qualification
Data storage and transmission to VirtuOx
O.E. Office Edition for Non Qualification
USB interface for data transfer
72 hours of data storage
Records at 1 second intervals
Three display modes
Special design for sleep monitoring
LCD Displays SpO2, SpO2 waveform & Pulse Rate
Low power consumption, uses 2 AAA battery
Battery low indicator
3 year warranty
Call Toll-Free 877-337-7111 • https://www.virtuox.net
VPOD-H
$219 with
FREE Software!
VPOD-H, a VirtuOx Pulse Oximetry Device
VirtuOx, Inc
, is also a nationwide Medicare approved Independent Diagnostic Testing Facility. "The VirtuOx T
Solution"
consists of our flagship Overnight Oximetry Testing platform VirtuOx
with our new, FDA approved VirtuOx compatible Pulse Oximeter Devices called VirtuOx VPODs. The VPOD line
consists of both handheld and wrist worn Oximeters that can store up to 72 hours of recorded memory. By combining a
NO CHARGE software with inexpensive hardware "The VirtuOx Total Solution" is the industry's most cost effective
way to qualify oxygen patients.
VirtuOx
is the latest generation of CMS approved Overnight Oximetry Testing software. It is designed to be an easy
TM
to use, trouble free software application available to all HME providers. There is no software to download or purchase
and no contracts to sign. Best of all, the report is available quickly provided you have fulfilled CMS guidelines as a
predicate to obtaining the report. VirtuOx
is compatible with the VPOD-Wrist, VPOD-Handheld, 920M, 920M Plus,
TM
8500, 2500A and Wrist Ox pulse oximeters.

Technical Specifications

PATIENT RANGE
Adult, Pediatric and Neonatal patients
SpO2
Measurement range
0%-99%
Resolution
1%
+ 2%
Accuracy
80%-99%:
+ 3%
70%-80%:
0%-69%:unspecified
HEART (PULSE) RATE
Range
0-254 bpm
Resolution
1bpm
+ 2bpm or + 2%
Accuracy
Voice
PR tone modulation
DISPLAY
Type
LCD
Parameters
SpO
, PR, Waveform,
2
Bargraph
Mode
Three display modes
Brightness
Adjustable 10 levels
STORAGE
Patient ID
10 patients
Data records
up to 72 hours
ENVIRONMENTAL
Operating Temperature
0°C-50°C
Storage Temperature
-10°C - 60°C
Operating Humidity
15%RH - 95%RH
Storage Humidity
10%RH - 95%RH
BATTERY
Type
2AA alkaline or rechargeable
batteries
Operation time
About 24 hours for normal
operation
CLASSIFICATION
Type of protection
Internally powered equipment
Safety
IEC 60601-1
MECHANICAL
Dimensions
130 x 40 27 mm
Weight
120g (including battery)
Call Toll-Free 877-337-7111
otal
TM
now at NO CHARGE, combined
Data Transmission to VirtuOx
The VirtuOx Total Solution
No cost software + low cost oximeters =
The industry's most cost effective way to qualify oxygen patients!
Click here
to get yours
NOW!
Call Toll-Free 877-337-7111 • https://www.virtuox.net
View Summary and Detail
Oximetry Reports
Manage Business with Dashboards

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VPOD-H and is the answer not in the manual?

Questions and answers

Summary of Contents for Virtuox VPOD-H

  • Page 1: Technical Specifications

    NO CHARGE, combined with our new, FDA approved VirtuOx compatible Pulse Oximeter Devices called VirtuOx VPODs. The VPOD line consists of both handheld and wrist worn Oximeters that can store up to 72 hours of recorded memory. By combining a NO CHARGE software with inexpensive hardware “The VirtuOx Total Solution”...
  • Page 2: Table Of Contents

    V P O D O P E R A T O R ' S M A N U A L V e r 1 . 2 CONTENTS CHAPTER 1 INTRODUCTION........1 1.1 BRIEF INTRODUCTION ................... 1 1.3 ELECTROMAGNETIC COMPATIBILITY..............2 1.4 EQUIPMENT CLASSIFICATION ................2 2.1 OUTER VIEW ......................
  • Page 3: Electromagnetic Compatibility

    2. Finger sensor for neonate: compatible with BCI (Neonate<3kg) 3. Software license 5. Data cable for transmission to Virtuox 6. 2 year extended warranty Confirm that the items listed are packed with the pulse oximeter. If any item on this list is missing or damaged, contact your distributor. Contact the carrier immediately if the shipping carton is damaged.
  • Page 4: Install The Batteries

    V P O D O P E R A T O R ' S M A N U A L V e r 1 . 2 Figure 2.2 rear view 2.2 Install the batteries The oximeter can be powered by 2 AA-Size alkaline batteries (which will typically provide 50 hours of continuous operation), or by the optional rechargeable NiMH battery pack. When battery power is lower than 2.4V, the sign will flicker in its display area.
  • Page 5: Display

    V P O D O P E R A T O R ' S M A N U A L V e r 1 . 2 2.5.3 Extremely high illumination could affect the SpO measurement. Use a semi-translucent or opaque cover to shield the sensor. 2.5.4 Other factors a) High-frequency electrosurgical interference from external devices, including defibrillators.
  • Page 6: Data Replay And Transmission

    3.4 Data replay and transmission The oximeter can record SpO2 and PR value for more than 24 hours, and can analyze records one by one. You can transmit the history data to a PC using “Virtuox” software and a special data cable.
  • Page 7: Warranty And Repair

    ●Damage to a product as a result of not conforming to manual specifications. 4.3.5 User’s Special Request for Extended Warranty Our warranty is consistent with industry standards. The device and accessories come standard with a 1 year warranty. An extended warranty can be purchased from Virtuox at the user’s request. Return Policy: Warranty and non warranty returns should be handled in the following manner: Contact the Technical Support Department and obtain a RMA (Return Materials Authorization) number.
  • Page 8: Appendix A Specifications

    V P O D O P E R A T O R ' S M A N U A L V e r 1 . 2 4.3.6 Repackaging for returns ●Place all accessories in a watertight Ziploc bag ●Use original package and packing material if possible. User will be responsible for damage caused by improper packaging during transportation. ●Ensure the RMA number is clearly printed on the Box.
  • Page 9 V P O D O P E R A T O R ' S M A N U A L V e r 1 . 2 Guidance and manufacture's declaration - electromagnetic immunity The Handheld Pulse Oximeter is intended for use in an electromagnetic environment specified below.
  • Page 10 V P O D O P E R A T O R ' S M A N U A L V e r 1 . 2 objects and people.

Table of Contents