Engine Oil Level - TVS NTORQ 125 Owner's Manual

ENGINE OIL LEVEL

Check the engine oil level periodically.
1. Place the vehicle on centre stand on a flat surface.
Wipe-off the surroundings of gauge oil level.
2. Remove the gauge and wipe it clean.
3. Fix the gauge back to its mounting hole. Do not
thread in.
4. Take out the gauge and check the oil level. The
level should be between minimum and maximum
level marks of the gauge (shown in the figure).
5. If the oil is less than the minimum level, add 'TVS
TRU4 SKUUTA oil (SAE 10W30 API-SL, JASO
MB)' upto the maximum level mark.
56
Maximum
Minimum
6. Wipe out the oil traces with a clean cloth to
prevent dust accumulation.
7 . Assemble back the gauge oil level.
Caution
If the vehicle is driven with less engine oil, the engine
components will be severely damaged.
Check the oil level as per the schedule to avoid costly
damage. Do not fill excess oil may cause oil leak. Always
use 'TVS TRU4 SKUUTA oil (SAE 10W30 API-SL, JASO
MB)' only.