Advertisement
General description (Fig. 1)
A Metal pod holder
B Handle
C Detachable plastic tea outlet
Before first use
Clean the tea pod holder with hot water and some washing-up liquid or in the
dishwasher.
Using the tea pod holder
Tip: If you have just used the SENSEO
machine to make coffee, rinse the machine with
®
water before you brew tea. This ensures the best taste and temperature for your cup
of tea. To rinse the machine, put the tea pod holder in the machine without a T-pod
and press the 1-cup button.
1
Fill the water reservoir with cold water up to the MAX indication and put it
back onto the machine.
Never pour milk, tea, hot water or carbonated water into the water reservoir.
-
Make sure that you fill the water reservoir at least to the 2-cup MIN line before
you start to brew tea.
-
A full reservoir allows you to make tea a number of times. This makes it
unnecessary to fill the water reservoir each time you want to make a cup of tea.
2
Press the on/off button.
The indicator light flashes when the water heats up. This takes approx.
,
75 seconds. When the light is on continuously, the machine is ready for use.
HD7832/30/26/24 only: the light rings around the 1-cup button q and the
,
w
2-cup/1-mug button qq/
also go on when the machine is ready for use.
3
Open the lid of the machine.
If there is still a coffee pod holder in the machine, remove it.
4
Place the Pickwick tea pod holder in the machine.
The 1-cup and 2-cup/1-mug SENSEO
®
brewing tea.
5
Select a Pickwick T-pod in your favourite flavour and place it properly in the
centre of the metal holder with the convex size pointing downwards (Fig. 2).
Make sure the tea in the pod is evenly distributed and press the pod lightly into the
pod holder.
-
Only use Pickwick T-pods, as they have been specially designed to brew tea in the
SENSEO
machine with the special tea pod holder.
®
-
Each Pickwick T-pod contains the optimal amount of tea for one cup.
4222.200.0066.1.indd 2
coffee pod holders are NOT suitable for
1
Never use torn pods or loose tea, as this causes the machine to become blocked.
6
Close and lock the lid.
Make sure the lid is properly locked.
Never brew tea with the lid open.
7
Place one glass or mug with a capacity of at least 5oz under the spout.
HD7832/30 only: The cups you use should have a capacity of at least 4oz when you
select a small cup f, 5oz when you select a medium cup g and 6oz when you select
a large cup h. Do not use cups that are too large, as they cause the tea to get cold
more quickly.
8
Press the 1-cup button q.
The SENSEO
machine starts to brew tea.
®
The machine automatically supplies the optimal amount of water for one cup of tea.
You can interrupt the brewing process at any time by pressing the on/off button. If
you switch the machine back on after interrupting the brewing process, the machine
does not complete the interrupted brewing cycle.
Do not remove the water reservoir during a brewing cycle, as this causes the
machine to draw in air. When this happens, the next cup is only partly filled.
9
Lift the tea pod holder out of the machine and empty it.
Be careful when you do this. There may still be some water/tea on the T-pod or in
the tea pod holder.
2
3
4
06-09-2006 09:06:50
Advertisement
