Battery Replacement, Removal & Disposal - Wahl MAX 45 Instructions Manual

BATTERY REPLACEMENT, REMOVAL AND DISPOSAL
MINI ARCO - WM6565
BRAVMINI - WM6590
For battery replacement the entire, intact trimmer should be sent to: Wahl (UK) Ltd Customer Services
(the address can be found on the reverse of this booklet) or taken to a suitably qualified professional. The
battery should only be replaced by the original manufacturers spare.
Battery Removal and Disposal
At the end of its life, when it will no longer take a full charge, the battery in your trimmer must be removed
and recycled/disposed of correctly. Batteries should be disposed of at an official collection point. If you
are having trouble removing the battery you can also return the product to Wahl (UK) Ltd Customer
Services who will dispose of it in an environmentally safe way.
To remove the battery follow these steps:
1. Unplug the transformer from the outlet, disconnect from trimmer and allow the
batteries to completely run down before disassembly.
2. Remove the Blade
3. Using a Torx 7 screwdriver, remove the 2 screws found under the blade
4. Prize the Trimmer apart along the join in the housing
5. Remove the motor and PCB assembly
6. Remove the battery by prizing up from the PCB (be careful not to puncture the battery)
7. Apply tape to both ends of the battery before recycling/disposing.
Replacement batteries can be ordered from: Wahl (UK) Ltd Customer Services (the address can be
found on the reverse of this booklet). The battery should only be replaced by the original manufacturers
spare.
ARCO - WM6565
Battery Removal and Disposal
At the end of its life, when it will no longer take a full charge, the battery in your clipper must be removed
and recycled/disposed of correctly. Batteries should be disposed of at an official collection point. If you
are having trouble removing the battery you can also return the product to Wahl (UK) Ltd Customer
Services who will dispose of it in an environmentally safe way.
To remove the battery follow these steps:
1. Allow the batteries to completely run down before removing.
2. Press the clips on each side of the battery and remove.
3. Apply tape to over the contacts of the battery before recycling/disposing.
Bravura - WM6870-803
Lithium Battery Replacement, Removal and Disposal
For battery replacement the entire, intact clipper or trimmer should be sent to: Wahl (UK) Ltd Customer
Services (the address can be found on the reverse of this booklet) or taken to a suitably qualified
professional. The battery should only be replaced by the original manufacturers spare, for safety reasons
a substitute should not be used.
Do not attempt to remove the battery. Lithium-Ion batteries can explode, catch fire, and/or cause burns if
disassembled, damaged or exposed to water or high temperatures.
Lithium Battery Disposal
Do not dispose of this product or the Lithium battery in the normal household waste.
The product should be returned to Wahl Customer Services where we offer a take back service or taken
to a local collection facility where they will be dealt with safely and sent for the appropriate recycling.
33