Table of Contents
Advertisement
FilmDrums 3012-3025
J
OBO Filmdrums der Serie 3000 wurden für
die Planfilmentwicklung, für den Einsatz, auf
Colorprocessoren mit JOBO Lift und Auto-
lab, konzipiert.
Je nach Drumtyp ist die Verarbeitung von
Planfilmen ab Format 6x9 cm bis 8x10"
möglich.
Die Bestückung erfolgt ohne Ladehilfe. Für
sicheren Sitz der Filme sorgen flache Profil-
leisten, die entsprechend dem jeweiligen For-
mat angeordnet sind.
Verarbeitungshinweis:
Die Rotationsgeschwindigkeit auf JOBO Color-
processoren sollte 50 U/min. betragen.
Bei S/W - Filmen empfehlen wir eine 5 Min. Vor-
wässerung mit temperiertem Wasser. Generell
gelten die vom Chemiekalienhersteller vorge-
gebenen Verarbeitungszeiten, Temperaturen
und Bäderkapazitäten. Zur Bestimmung der
genauen Verarbeitungszeiten empfehlen wir
eine Testentwicklung.
Filme mit matter Rückschicht können in den
Filmdrums 3012 bis 3025 nicht verarbeitet wer-
den.
Achtung: Netzmittel und Stabibad nicht in die
Drum einfüllen! Hierfür separates Gefäß ver-
wenden.
Typ
FilmDrum
3012
FilmDrum
3013
FilmDrum
3018
Film Drum
3020
EBVDrum*
3021
FilmDrum
3024
FilmDrum
3025
Sonderanfertigungen, für doppelte bis dreifache Kapazität sowie spezielle Formate, auf Anfrage.
JOBO Labortechnik GmbH + Co. KG
Kölner Str. 58
D-51645 Gummersbach (Derschlag)
Öffnen der Drums
Drumdeckel von Hand abziehen
oder mit Fußpumpe Art. Nr. 3360. (außer Tank
3021)
Schließen der Drums (außer Drum 3021)
Zahnkranzdeckel aufsetzen und rundum fest
aufdrücken.
Wichtig! Für Übertragung der Rotation und
gleichmäßigen Lauf der Drum.
Bestücken der Drums
Bei Dunkelheit Filme, mit der Schichtseite nach
innen, einlegen.
Format
Menge
6 x 9
12
9 x 12
6
4 x 5"
5
13 x 18
4
40 x 50
1
13 x 18
3
18 x 24
2
8 x 10"
2
Made in Germany
Schließen der Drum 3021
Tank 3021*
Dieser Tank ist für den Einsatz auf ATL 1000 /
1500 konzipiert. Die im Lieferumfang enthalte-
ne rote Dichtung darf für den ATL 1000 / 1500
Betrieb nicht eingesetzt werden. Zahnkranz-
deckel mit eingesetzter Dichtung führen zu Fehl-
entwicklungen und beschädigen das Gerät.
Achtung:
Bei Verwendung auf Liftprocessoren oder ATL
muß die rote Dichtung in den Zahnkranz einge-
drückt werden.
Technische Änderungen vorbehalten.
oder
Chemie
330 ml
330 ml
330 ml
330 ml
470 ml
210 ml
330 ml
330 ml
01098 (86 329)
Advertisement
Table of Contents
Related Manuals for JOBO 3012
Summary of Contents for JOBO 3012
- Page 1 Testentwicklung. Bei Verwendung auf Liftprocessoren oder ATL Filme mit matter Rückschicht können in den muß die rote Dichtung in den Zahnkranz einge- Filmdrums 3012 bis 3025 nicht verarbeitet wer- drückt werden. den. Achtung: Netzmittel und Stabibad nicht in die Bestücken der Drums...
- Page 2 When operating the tank no. 3021 on a manual As always, it is best to make a test run prior to JOBO Lift or an ATL, the red sealing ring (cog processing valuable images. Films with mat back lid washer) must be used in the cog lid to prevent coatings cannot be processed in the Film Drums chemical leakage.
- Page 3 | ©JOBO AG Service Analog How to Load Film on JOBO Plastic Reels From time-to-time, we hear of customers having difficulty loading our #1501 and #2502 walk-in plastic reels. They are actually quite easy to use, but there are a few tips, which can make the process easier.
- Page 4 You’re done. JOBO’s plastic reels and our stainless steel reels made for JOBO Fototechnic by Hewes, produce essentially identical results. We have measured the density...
- Page 5 Mounting a Magnet On a Tank or Drum To use a tank or drum on a manual processor (without the JOBO Lift attached), a magnet must be mounted on its bottom. A magnet is not required for any of the Autolabs.
- Page 6 Autolab. Some tanks come with the cog already installed. If you are purchasing a tank, check the JOBO part number of the tank. If the first or last digit of the four digit code is a '3' (3010, 2523, etc.), then there is already a cog installed in the lid. If the first or last digit is not a '3', then you will need to purchase a Cog (#1505) for the tank or drum.
- Page 7 If you use a lid without a washer, the junction of the JOBO Lift and tank will leak. Never try to remove an installed cog from its lid, as you will break either the cog or the lid.
- Page 8 (the most expensive part). With JOBO tanks, if you have a two-roll tank #1520 and you want to increase the capacity all you need to buy is an extension module #1530.
- Page 9 Acessoires and spareparts Magnet Item No. 1504 Allows use of all tanks and drums on processors without a Jobo Lift (magnet drive). The magnet upgrades all inversion tanks to rotary tanks. All tanks and drums (except the 3000 system and Expert) have holding pins on the bottom to which the magnet is at-tached.
- Page 10 The 2500 series tanks are used for roll film and 4x5" sheet film. They are not designed for traditional inversion (hand) processing because they would use too much chemistry if they weren't used horizontally. The 2500 series tanks are designed to be used with JOBO rotary processors Key Features Roll and sheet-film processing with one system Develop you color or black and white film with one system.You'll save money on chemicals, and you'll save...
- Page 11 Used with #2512 (the reason they're not included together is 2508 4x5" Loader Base there are other guide sizes available). 2512 4x5" Loader Guide Used with #2508 2519 APS Reel Used to develop the new APS format film. 4341 Sheet Film Kit, One-Reel Includes #2521 and #2509N 4342 Sheet Film Kit, Two-Reel Includes #2551 and 2x #2509N 2500 System - Film Quantity / Chemical Volume Chart...
- Page 12 When you need to move to a larger format print, simply add an extension piece. The same tank you use for test strips can be used for larger prints. Daylight operation Whether or not you decide to purchase a JOBO processor, you still get the benefits of the tanks being light- tight. /Capacities:...
- Page 13 Print Drum Chart - Quantity Drum Number 4x5"* 5x7" 8x10" 11x14" 16x20" 20x24" Min Chem Vol 2820 Test Drum 40ml 1526 Combo 40ml 2830 Drum 100ml 2840 Drum 120ml 2850 Drum 200ml 2870 Module 100ml 3063 Drum 300ml * Note: Quantities reflected are using the #6810 Varioformat Easel...
- Page 14 How can I start using the Expert Drums!? The Expert Drums fit on the JOBO CPA-2, CPP-2, and ATL-2x00 (they don't fit on the CPE-2 or ATL- 1000/1500). (One interesting point about the Expert Drums: We hear time and time again that people purchase a processor to get to use the Expert Drums.
- Page 15 Used for drying the #3006 and #3010 Expert Drums. (Included 3007 Sponge Rod with drum). Used for drying the #3004 and #3005 Expert Drums. (Included 3008 Sponge Rod with drum). Expert Sheet Film Drums Drum # Film and Print Capacities Min/Max Chem Vol 3005 5 - 8x10", 5x7"...
- Page 16 3010 Introduction [Expert 3010, Expert 3006, Expert 3005, Expert 3004] JOBO Expert Drums permit the processing of film and prints in the following sizes: Drum #3004 4 pieces of 5 x 7" to 8 1/2 x 12" film or paper...
- Page 17 Drum #3006 6 pieces of 4 x 5" to 5 x 7" film or paper Solution required Minimum 210 ml Maximum 1000 ml Drum #3010 10 pieces of 4 x 5" film or paper Solution required Minimum 210 ml Maximum 1000 ml Back to Top Index This Page:...
- Page 18 The Drums [Drying Rod, Cog Lid with Light Trap, Drum Body, Film] Back to Top Opening the Drum [Foot Pump #3360] The lid is most easily removed with foot pump #3360. Firmly grasp the lid while pumping up the pressure inside the Drum.
- Page 19 Caution: The Expert Series of Drums will fit on JOBO CPA-2 and CPP-2 manual processors. Care must be taken! A loaded Expert Drum can be very heavy and strain both the rotation motor and lift of manual processors.
- Page 20 Filling Quantity The actual amount of chemicals needed will depend on three factors; the amount of film surface being processed, the chemicals being used and the minimum solution level required by the Drum for proper solution coverage. The tables below provide a concise way to select the minimum chemical requirements for most processes. But some processes (particularly dilute black and white developers) may require higher solution levels in order to have sufficient active chemicals for the surface area to be processed.
- Page 21 Process Chemical Volume RA-4 61 ml / 8x10" R-3000 50 ml / 8x10" Ilfochrome 75 ml / 8x10" Black and White 50 ml / 8x10" Back to Top Detailed Tables As long as you are using only a single size of sheet film in the Expert Drum at one time, these tables will show you the solution quantity needed.
- Page 22 3004 8 X 10" 270 400 600 800 3004 8 1/2 X 12" 270 480 720 960 3005 5 X 7" 270 270 270 340 3005 8 X 10" 270 400 600 800 1000 3006 4 X 5" 210 210 210 210 3006 5 X 7"...
- Page 23 JOBO - Filmentwicklungsgerät 30 M / 35, 60 und 70 mm Komplett-Kits bis zu einer max. Länge von 10 Meter Kurbel Einspulgerät Spiraleinsatz Einspulvorrichtung Rändelmutter Schablone Druckplatte Schalter für Rückspulung obere Spirale Filmteller untere Spirale Kameraspule Archifspule für Rückspulung...
- Page 24 EINSPULEN der Filme 35, 60 und 70 mm 1. Stellen Sie das Einspulgerät mit dem Spiral- 7 Legen Sie die schwarze Druckplatte (Profil- einsatz auf einen Arbeitstisch oder eine an- fläche nach unten) auf die obere Spirale und dere ebene Unterlage. verschrauben Sie den Spiraleneinsatz handfest mit der Rändelmutter.
- Page 25 Durch die Verwendung mehrerer Spiraleinsätze wird ein TROCKNEN kontinuierliches Arbeiten ermöglicht und damit auch die Arbeitsgeschwin- digkeit erhöht. Der Filmtrocknung im JOBO-Trocken- gerät muß eine Netzmittelbehandlung Bei der Zweitbelichtung bleiben Umkehrfilme im Spiraleinsatz. Der Ein- vorausgehen. Nachdem der Einsatz ab- getropft ist, sichern Sie das Filmende satz wird im Wässerungstank leicht gedreht und sollte ständig gut mit Was-...
- Page 26 WECHSELN DER FILTERMATTE führung ist es für ein Format ausgerü- stet und kann durch zusätzliche Scha- blonen und Spiraleneinsätze sehr ein- Die Filtermatte im Deckel des JOBO- fach auf andere Formate umgestellt Trockengerätes ist leicht auszuwech- werden. seln. Entfernen Sie hierzu die schwarze Platte auf der Deckelunterseite, indem Sie mit der flachen Hand auf die Platte drük-...
- Page 27 WARTUNG UND PFLEGE JOBO-Filmentwicklungsgerät Reinigen Sie die Spiraleinsätze und Tanks von Zeit zu Zeit mit den im Laborbetrieb 30 M / 16 mm bekannten Reinigungsmitteln (stark verdünnte Salzsäure, Tankrein und dergl.). Danach müssen die Geräteteile wieder gut ausgespült und getrocknet werden.
- Page 28 EINSPULEN des 16-mm-Films 6. Straffen Sie den Film, indem Sie die Kameras- pule etwas nach rechts drehen. Beachten Sie genau den Filmverlauf nach Abb. 15. Die Stel- lung der unteren Spirale – Federlasche zur 1. Stellen Sie das Einspulgerät mit dem Spiral- Bedienperson –...
- Page 29 Hand gegen die untere Spi- Abb. 15 rale ab. So bleibt der Film stets straff gespannt und ist in wenigen Sekunden umgespult. JOBO Labortechnik GmbH + Co. KG Kölner Str. 58 D-51645 Gummersbach (Derschlag) Made in Germany Technische Änderungen vorbehalten.
- Page 30 > Service > Back E-Mail Formular Webmaster Impressum | ©JOBO AG Service Analog Loading Film and Paper Introduction Loading film onto reels or prints into drums needs to be accomplished before the processing is begun. The pages linked below are detailed instructions on how to load your film or prints. Also included are pages on tank and drum care and identification of their components.
- Page 31 The plastics used in JOBO film tanks or drums are safe for use with any currently available infrared film. They are opaque to the frequencies of infrared light to which the films are sensitive. This includes the Konica and Kodak High Speed Infrared films for black and white, and Kodak Aero- Infrared Color (E-4) film.
- Page 32 > Service > Back E-Mail Formular Webmaster Impressum | ©JOBO AG Service Analog Instructions for Loading the #3027 and #3028 Sheet-Film Drums Œ The drum and insert must be completely dry before attempting to load the film in the insert.
- Page 33 -- this may cause damage! ‘ When processing with any 3000 series drum, JOBO recommends a rotation speed of 50 rpm (or ‘P’ on an ATL-1, CPA-2, or CPP-2). Adjust the level of...
- Page 34 Too low a water level may cause the temperature tolerance to fluctuate and too high a water level may cause uneven processing (the drum will not be level if it floats off the rollers). ’ Required solution levels will vary with different film types and processes. Use the following amounts as a starting point: Drum Description Starting Quantity 3027 11 x 14"...
- Page 35 Rotational tank system 2500 The 2500 system tanks were developed to meet the needs of professional photographers. They are compatible with all standard films from 35 mm to 4x5" It is a system in which the tank size can be adapted to match the quantity of film to be processed, thus enabling optimum use of chemicals.
- Page 36 (Fig. B) Sheet Film Set The 2509n film reel, holds 6 sheets of up to 4x5" film. To load film, the loader base 2508 is recommended, along with the appropriate loader guide, shown below. As shown in Fig. B, slide the film into the reel with the emulsion side facing the Sheet Film Reel 2509n center.
- Page 37 Loading the tanks The center cores are an essential part of the light trap on 2500 series tanks. Be certain to push the reels fully onto the appropriate center core for the tank in use. Then put the center core with the Depress the pressure-compensating dia- reels into the tank and seat it in the phragm first and then push the cap onto...
- Page 38 Processing a) Processors with a JOBO-Lift, tanks 25 Couple the tank to the processor with the JOBO-Lift. Pour the solutions into the top of the lift during rotation. c) Processors without JOBO-Lift, tanks 25 Speed: Attention: pour the chemicals quickly,...
- Page 39 Tank Reels Chemistry-film capacity Type 9 x 12 35 mm 60 mm 6 x 9 4 x 5" Duo-Set 2502 2509n 170 ml 1·135-36 2513 270 ml 270 ml 2·135-36 6·6x 9 2·120 6·9x12 1·220 6·4x 5" 170 ml 2523/21 1·120 640 ml 560 ml...
- Page 40 Tankoberteil verschlos- Cascade in das Loch des Stopfens. JOBO Labortechnik • Kölner Str. 58 • 51645 Gummersbach • Tel.: +49 (0) 2261 545-0 • Fax: +49 (0) 2261 545-42 • Internet: www.jobo.com • e-mail: info@jobo.com • 12099 (86 010)
- Page 41 JOBO Labortechnik • Kölner Str. 58 • 51645 Gummersbach • Tel.: +49 (0) 2261 545-0 • Fax: +49 (0) 2261 545-42 • Internet: www.jobo.com • e-mail: info@jobo.com • 12099 (86 010)
- Page 42 I’axe creux jusqu'à butée et procéder à un lavage intense et rapide avec une CASCADE JOBO Labortechnik • Kölner Str. 58 • 51645 Gummersbach • Tel.: +49 (0) 2261 545-0 • Fax: +49 (0) 2261 545-42 • Internet: www.jobo.com • e-mail: info@jobo.com • 12099 (86 010)
- Page 43 Se recomienda cambiar el agua El casquillo queda en su posición superior. En JOBO Labortechnik • Kölner Str. 58 • 51645 Gummersbach • Tel.: +49 (0) 2261 545-0 • Fax: +49 (0) 2261 545-42 • Internet: www.jobo.com • e-mail: info@jobo.com • 12099 (86 010)
- Page 44 > Service > Back E-Mail Formular Webmaster Impressum | ©JOBO AG Service Analog Tank and Drum Capacities Introduction This information is the most current as of its posting. Please use this information, if there is a conflict with previously published materials.
- Page 45 When in doubt, use a higher volume of solutions. The 'Minimum Volume' is just that, a minimum. Using more than a minimum amount will not harm virtually any process. Extra volume of chemicals will not "over develop" your film or paper. (Note, however, the precautions in the next section regarding processor limits.) If your film or paper is coming out "underdeveloped"...
- Page 46 Film Tanks and Reels Back to Top 1500 Series Tanks with 1501 Reels Film Tanks 35mm 120 220 Center Core Minimum Volume Notes 1510 Tank 04043 140 ml (4 3/4 oz) 35mm only, 1520 Tank 04044 240 ml (8 oz) 1530 Module 04045 330 ml (11 1/4 oz)
- Page 47 per reel) Film Tanks Center Core Minimum Volume Notes 2521 or 2523 Tank 04044 170 ml (5 3/4 oz) 2521 magnet, 2523 cog 2551 or 2553 Tank 04044 + 04045 330 ml (11 3/4 oz) 2551 magnet, 2553 cog 2560 Module (2x) 04045 400 ml (13 1/2 oz) 2563 Tank...
- Page 48 The ATL's 3 and 3000 cannot be used with more than 1500 ml of solution. This tank or drum requires a Cog #1505 to be installed before using it on a JOBO Lift or an ATL processor, or a Magnet #1504 for use with a magnet drive processor.
- Page 49 Tank and Drum Care Introduction With a little care, the JOBO tanks and drums should last a very long time. Follow the procedures below to assure optimum performance and to prevent future processing problems. Tank and Drum Care Disassemble the tank or drum. Remove the beaker or funnel from the lid (except 3000 series).
- Page 50 Also, JOBO offers an excellent product for cleaning your processor, tanks, and reels, called Processor Clean II, a powdered concentrate, available in two sizes #4135 (4.7 lb. jug) and #4136 (4oz. packet).
Need help?
Do you have a question about the 3012 and is the answer not in the manual?
Questions and answers