Automatic Carpet Height Adjustment How To Change the Vacuum Bag Remove/Install the Bottom Plate Change the Belt Reset the Circuit Breaker Problem Solving Guide Troubleshooting Visit Riccar Vacuums Online How to Contact Your Authorized Retailer Key Replacement Parts For Best Performance Warranty...
If appliance is not working as it filters in place. should, has been dropped, damaged, left outdoors, or dropped into water, return it to your Authorized Riccar • Turn off all controls before unplugging. Retailer for service. • Use extra care when cleaning on stairs.
POLARIZATION INSTRUCTIONS Power Cord, 2-Wire Polarized Cord To reduce the risk of electric shock, this product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug.
ASSEMBLING THE VACUUM Attaching the Handle to the Vacuum NOTE: Do not plug in the vacuum until it is completely assembled. The vacuum cleaner handle is packed as a separate component that requires assembly. • Release the handle bracket from the handle tube by removing the two screws (Fig.
ASSEMBLING THE VACUUM Positioning the Power Cord • Loosen, but do not remove, the screw holding the upper cord hook (Fig. 1). • Position the cord between the cord hook and the vacuum tube (Fig. 2). Re-tighten the screw. • Once the cord is secured by the cord hook, proceed with wrapping the cord.
OPERATION This vacuum is intended for household use only. Turning the Vacuum On/Off The switch is located on the back of the nozzle to the left of the handle tube (Fig. 1). Press the switch with your foot to turn the vacuum On or Off.
HOW TO Change the Vacuum Bag NOTE: Unplug the vacuum cleaner from the electrical outlet before changing the bag. • Unzip the outer cloth bag (Fig. 1). • Remove the used bag by pressing the bag holder tab and pulling the bag off vacuum (Fig.
HOW TO Remove/Install the Bottom Plate CAUTION: To reduce the risk of injury from moving parts, unplug the vacuum before servicing. To Remove Bottom Plate • After unplugging the power cord, turn the vacuum cleaner over, exposing the underside. • Press the two holding tabs towards the back of the nozzle.
HOW TO Change the Belt CAUTION: To reduce the risk of injury from moving parts, unplug the vacuum before servicing. • Turn the vacuum over and remove the bottom plate (see “Removing and Reinstalling the Bottom Plate” on pg. 9). •...
Bottom Plate” on pg. 9), reset the circuit breaker by pressing the Circuit Breaker Reset Button (Fig. 1), plug in power cord, and turn unit on. If the unit fails to turn on, return it to an Authorized Riccar Retailer for service.
• Change vacuum bags once a month or when the bags are 2/3 full to maximize cleaning performance. • Always use genuine Riccar vacuum bags and replacement parts. Use of other products may result in poor cleaning performance, potential vacuum cleaner damage and may void vacuum warranty.
WARRANTY What is Covered: This warranty covers any defects in material and workmanship in your new Riccar vacuum and applies exclusively to the original purchaser. How Long Coverage Lasts: Warranty coverage for your Riccar SupraLite vacuum lasts three years. Household models used commercially are only warranted for 90 days.
Need help?
Do you have a question about the SupraLite R10E and is the answer not in the manual?
Questions and answers