Solution; Configuration Terminal Issues; No Display On The Configuration Terminal; Garbled Display On The Configuration Terminal - H3C S5110V2 Series Installation Manual

Solution

When a fan tray issue occurs, contact H3C Support.

Configuration terminal issues

No display on the configuration terminal

Symptom
The configuration terminal does not have display when the switch is powered on.
Solution
To resolve the issue:
Verify that the power system is operating correctly.
1.
Verify that the switch is operating correctly.
2.
Verify that the console cable has been connected correctly.
3.
Verify that the following settings are configured for the terminal:
4.
Baud rate—9600.
Data bits—8.
Parity—None.
Stop bits—1.
Flow control—None.
Verify that the console cable is not faulty.
5.
If the issue persists, contact H3C Support.
6.

Garbled display on the configuration terminal

Symptom
The configuration terminal displays garbled text.
Solution
To resolve the issue:
Verify that the following settings are configured for the terminal:
1.
Baud rate—9600.
Data bits—8.
Parity—None.
Stop bits—1.
Flow control—None.
If the issue persists, contact H3C Support.
2.
22