Lubricating The Cot - Ferno 24 MAXX User Manual

24-MAXX , 24-miniMAXX
™

6.7 Lubricating the Cot

Disinfect and clean the cot before applying lubricant. Use
the lubricants designated below. Do not lubricate points
marked with the "Do Not Lubricate" symbol.
The lubrication points are the same for the Model 24-MAXX,
Model 24-miniMAXX, and Model 24-H miniMAXX cots.
Release-Handle
Hinges (7)
1
1
Reference # Location
Release Handle Hinges
1
I-Beam
2
Steel Rod (inside leg-return spring)
3
Leg Joints
4
Wheels (sealed bearings)
Upper leg pivot points
© Ferno-Washington, Inc. 234-3307-02 November 2008
, 24H-miniMAXX
®
I-Beam
2
1
Steel Rod
3
(inside spring)
LUbRICaTIoN PoINTS
# of Points
™
Lubricating parts that should not be lubricated allows
dirt and foreign particles to collect on those parts,
resulting in damage. Lubricate only the numbered
reference points shown.
Lubricate
1
(Use a small amount of lubricant)
7 WRL-191-S or EZ-1 synthetic lubricant
1
1 WRL-191-S or EZ-1 synthetic lubricant
4 WRL-191-S or EZ-1 synthetic lubricant
0
0
Maintenance
Important
Do Not Lubricate
Illustration Shows
Top-Down View
with Bed Surface Removed
4
Leg Joints
Lubricate With
White lithium grease
Do not lubricate
Do not lubricate
27