Rollplay W421 Owner's Manual And Assembly Instructions

Rollplay W421 Owner's Manual And Assembly Instructions

24

Advertisement

®
Owner's Manual and Assembly Instructions
Model #: W421
Read and understand the entire manual before assembly and operation. The vehicle must be
assembled by an adult who has read and understands the instructions.
Made in China.
Styles and colors may vary. Do not return to store. Visit us online at www.rollplay.com for
assistance and replacement parts.
IMPORTANT:
Save this manual with your sales receipt.
This vehicle is preset to run at the low
speed of 1.86 MPH. To allow higher
speed please see page 18.
24V MONSTER TRUCK

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the W421 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Rollplay W421

  • Page 1 Read and understand the entire manual before assembly and operation. The vehicle must be assembled by an adult who has read and understands the instructions. Made in China. Styles and colors may vary. Do not return to store. Visit us online at www.rollplay.com for assistance and replacement parts. IMPORTANT: Save this manual with your sales receipt.
  • Page 2 Introduction Thank you for purchasing this Rollplay vehicle! We hope the rider enjoys it for miles to come. Please read this instruction guide carefully before assembling and operating the vehicle. Please contact Rollplay Customer Service with any questions. Keep your sales receipt or register your product at www.rollplay.com.
  • Page 3 STORE, CONTACT ROLLPLAY WITH QUESTIONS. E-mail Customer Service if you need assistance or replacement parts. Please have your model number and serial number ready before calling. Keep your sales receipt or register your product at www.rollplay.com as we will require proof of purchase. customerservice@rollplay.com...
  • Page 4: Table Of Contents

    Table of Contents Safety ............5-6 Parts ............7 Charging Instructions ....... 8 Assemble the Steering Rod ..... 9 Assemble the Shock Absorbers ....10 Assemble the Front Wheels ...... 11 Assemble the Rear Wheels ....... 12 Assemble the Exhaust Stack ..... 13 Assemble the Steering Wheel ....
  • Page 5 Safety WARNING: SAFETY RIDING RULES The user must follow all safety rules and guidelines, or serious injury or death may occur to the user. • Always use common sense and safe practices when using the vehicle. The user must be at least 3 years old and weigh no more than 35 kg (77 lb). •...
  • Page 6: Safety

    Safety (Continued) WARNING: BATTERY SAFETY Battery posts, terminals and related accessories contain lead and lead components. • DO NOT open the battery. • Contact exposure to battery leakage (lead acid) may cause serious injury. Immediately contact your doctor if exposure occurs. If the chemical is on the skin, immediately give the person water or milk.
  • Page 7: Parts

    Parts Not Included: • Phillips screwdriver • 2 AAA batteries Helpful Tip: 1. Manual 15. Hex Wrench 1. Parts 16-26 are located in the blister pack 2. 24V Battery 16. Steering Wheel Screw M5x50 Spare parts: 2 bolts. Rear wheels are marked 3.
  • Page 8: Charging Instructions

    Charging Instructions YOU MUST CHARGE THE BATTERY FOR 24 HOURS BEFORE THE FIRST USE! ONLY AN ADULT SHOULD HANDLE THE BATTERY AND CHARGER. Connect the Battery: 1. Ensure the vehicle is stopped and turned off. 2. Locate the seat lock on the seat, then use a coin or flat head screwdriver to turn the seat lock to the unlock position.
  • Page 9: Assemble The Steering Rod

    Assemble the Steering Rod 1. Place the vehicle upside down on a soft surface and locate the steering rod hole. 2. Turn the steering rod to 90 insert the steering rod into the steering rod hole. 3. Insert the screw (24) though the hole located on the shorter end of the steering rod and through the hole on the car body, fasten the nut (25) to the end of the screw.
  • Page 10: Assemble The Shock Absorbers

    Assemble the Shock Absorbers 1. Take out the screw (19), washer (18), wrench (20) and nut (26) from the blister pack. 2. Align the shock absorber (B) with the metal holes. 3. Insert the screw (19) through the holes. Then slide the washer and screw nut onto the screw.
  • Page 11: Assemble The Front Wheels

    Assemble the Front Wheels Helpful Tip: 1. The side of the wheel with rectangular tabs should face outward and the side marked with an "F" faces inwards. 1. Take out the Φ12 front washers (12), Φ10 front/rear washers (13) and nut (14) from the blister pack. 2.
  • Page 12: Assemble The Rear Wheels

    Assemble the Rear Wheels Helpful Tip: 1. If you encounter trouble fitting both wheels onto the rear axle, then your rear wheel axle may need to be realigned. 2. Remove a wheel from the axle. Pull or push on the axle to slide it until you have enough room on both sides.
  • Page 13: Assemble The Exhaust Stack

    Assemble the Exhaust Stack 1. Place the square piece of the exhaust stack in the square slot on the car body, then use a screwdriver to secure it with the 4.2 x 15 bolt (23).
  • Page 14: Assemble The Steering Wheel

    Assemble the Steering Wheel 1. Locate the steering wheel screw (16) and nut (17) from the blister pack (27). 2. Align the steering wheel (3) with the steering rod, and insert it into the rod. 3. Align the holes on the steering wheel (3) with the holes on the steering rod.
  • Page 15: Assemble The Brush Guard

    Assemble the Brush Guard 1. Locate the brush guard, 2 M6x48 screws (21), 2 Φ6 washers (27) and 2 M6 nuts (22). The screws and nuts are located in the blister pack. 2. Align the holes on the brush guard with the holes on the metal frame under the front bumper.
  • Page 16: Attach The Seat

    Attach the Seat 1. Make sure the seat lock is turned to the unlocked position. Slide the tab on the back of the seat into the slot on the car body. 2. Align the seat over the battery compartment. Ensure the locking mechanism aligns with the hole on the car body.Then, slide the seat into position.
  • Page 17: Steering Wheel Batteries

    Steering Wheel Batteries WARNING! DO NOT mix old and new batteries. DO NOT mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. Steering wheel requires 2 x AAA batteries 1. Open the battery compartment cover with a screwdriver. 2. Insert the two AAA batteries into the battery compartment. 3.
  • Page 18: Product Features

    Product Features High Speed Lock Out Sound Buttons Power Button Shifter Pedal Power Button Push the Power Button to turn the vehicle ON/OFF. The Power Indicator Light will turn on when the car is on. Shifter Pull the Shifter up to move forward. Pull the Shifter down to reverse. Foot Pedal Press the Foot Pedal down to move.
  • Page 19: Maintenance

    Maintenance Important Battery and Charger Information • Only an adult who has read and understands the safety warnings may handle and operate the battery and battery charger. Keep away from children. • time. • Recharge the battery immediately after each use. Charge for at least 8-12 hours, but no more than 20 hours.
  • Page 20: General Care

    General Care • Regularly inspect all vehicle parts to ensure they are in good working condition. • Regularly inspect the charger, cord, plug, and other related parts for damage. • Remove any damaged parts and immediately contact Customer Service for replacement parts. See Service and Repairs on Page 24 for more information.
  • Page 21: Troubleshooting Guide

    Troubleshooting Guide Completely read through the manual and troubleshooting guide before contacting Customer Service. Problem Potential Cause Solution Vehicle does not run Battery is low Recharge the battery Thermal fuse tripped Reset fuse Loose wires or loose Ensure the battery connectors connectors are securely attached.
  • Page 22 Problem Potential Cause Solution Vehicle needs a push to Loose wires or loose Ensure the battery connectors start connectors are securely attached. If wires are loose, contact Customer Service “Dead spot” on motor A “dead spot” means electricity is not being delivered to the terminal.
  • Page 23: Fcc Information

    FCC Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 24: Service And Repairs

    Hours: 9 AM - 5 PM (CST), Monday - Friday 888-982-9309 Phone: 1- Email: customerservice@rollplay.com Web: www.rollplay.com For a list of available replacement parts, please visit www.rollplay.com. WE WILL REQUIRE PROOF OF PURCHASE. Please save your sales receipt or register your product at www.rollplay.com.
  • Page 25: Warranty

    This warranty does not cover, and is not intended to exclude any liability on the part of Rollplay, whether under this warranty or implied by law for any indirect or consequential damages for breach of warranty. Some states may not allow the exclusion or limitation so this limitation may not apply to you.
  • Page 26: Product Registration

    Product Registration First Name: Last Name: Title: Address: City: State: Zip Code: Email: Phone: Date of Purchase: Product Name: Model Number: Serial Number: Retailer Place of Purchase: Questions or comments? Contact us at www.rollplay.com or 1-888-982-9309...

Table of Contents