Advertisement
Why does my Zing® Bagless Canister have no or low suction?
Answer:
Use the following steps if your Zing® Bagless Canister has no or low suction:
•
Detach the hose from the base of the canister by twisting the hose counterclockwise and
pulling out.
•
Detach the hose from the extension wand by grasping each piece and pulling them apart. Do
the same to detach the foot.
Advertisement
Table of Contents
Related Manuals for Bissell Zing Bagless Canister Series
Summary of Contents for Bissell Zing Bagless Canister Series
- Page 1 Why does my Zing® Bagless Canister have no or low suction? Answer: Use the following steps if your Zing® Bagless Canister has no or low suction: • Detach the hose from the base of the canister by twisting the hose counterclockwise and pulling out.
- Page 2 • Remove the dirt tank by pressing the release button and lifting the tank away from the machine. • With all pieces detached, inspect all dirt flow openings for clogs. • If a clog is found, run a broomstick down the piece with a clog to clear it. •...
- Page 3 NOTE: If washed, allow all pieces to completely dry before reassembly. • To reassemble, replace the filter screen. • Next, align the tabs on the filter piece with their mating slots inside the dirt tank and twist clockwise to lock in place.
- Page 4 • Snap shut the dirt tank lid and reattach the dirt tank to the machine. Power on. If the machine is still blowing dust, pleasecontact us. A representative will be happy to assist you.
Need help?
Do you have a question about the Zing Bagless Canister Series and is the answer not in the manual?
Questions and answers