Restoring Factory Settings - Electro-Harmonix OCEANS 12 Quick Start Manual

R
ESTORING
To restore the Oceans 12 to factory default settings, press and hold the
REVERB TYPE knob while plugging power into the Oceans 12.
1. Unplug the power supply from the Oceans 12.
2. Press and hold the REVERB TYPE knob while plugging power back in
to the Oceans 12.
3. The PRESET LED will flash 7 times. You can release the REVERB TYPE
knob once you see this LED flashing.
4. When the knob is released, the following factory default settings will
be restored:
• All presets will be erased and restored to their factory default
settings.
•
All custom Expression Mode settings will be erased and restored
to the factory default Expression Mode settings.
• The tap tempo functionality for ECHO reverb and the hold-for-
infinite-sustain functionality of both footswitches will be enabled
• Normal
SEND/RETURN and disabling signal splitting.
• The alternate knob parameter INF LVL will be set to unity volume,
while the alternate knob parameters LO-FI and TIDE will be
turned off.
•
The Oceans 12 will start up in Reverb Engine A, with ROOM
Reverb Type selected in Mode 1. Reverb Engine B will be set to
REVERSE Reverb Type in Mode 1.
F
ACTORY
stereo operation
S
ETTINGS
will be
38
restored by disabling