Troubleshooting - Ariens IKON-XD Series Operator's Manual

Table of Contents

Advertisement

Problem
Probable Cause
Safety Interlock System is not
engaged or is faulty.
Fuel tank is empty.
Fuel supply is contaminated.
Battery is discharged.
Engine does
not start.
Connection between battery and
battery cables is poor.
Spark plug wire(s) are loose or
spark plug(s) are faulty.
Electrical system is faulty.
Engine is faulty.
Choke control knob is in on
position.
Engine runs
Air filter cartridge is plugged.
rough.
Engine is faulty.
Engine oil level is low.
Engine
Cooling fins are plugged.
overheats.
Engine is faulty.
The transaxles are bypassed.
Unit does not
drive.
Ground drive belt is faulty.
Transaxles are faulty.
Operator presence switch is not
engaged.
Operator presence switch is
faulty.
PTO
malfunctions.
Deck drive belt is faulty.
PTO switch, wiring, connectors
or clutch are faulty.
Unit moves
Parking brake needs adjustment. Adjust parking brake lever. Refer to your
with engine off
and parking
Parking brake is faulty.
brake engaged.
Tire pressure is incorrect.
Unit does not
Steering levers need adjustment. Adjust steering levers. See Adjust
track straight.
Transaxles and/or linkages need
adjustment.
Unit creeps
Transmission and/or linkage
when steering
need adjustment.
levers are in
neutral
position.

TROUBLESHOOTING

EN - 20
Correction
Check Safety Interlock System. See
Check Safety Interlock System on
page 15.
Fill fuel tank. See Before Operating Unit
on page 11.
Replace with clean fuel.
Charge battery. Refer to your unit's
service manual.
Tighten and/or clean battery and battery
cables. See Clean Battery on page 17.
Connect spark plug wire(s) or replace
spark plug(s). Refer to engine manual.
Contact your Ariens dealer.
Contact your Ariens dealer.
Move knob to off position.
Clean or replace air filter cartridge. Refer
to engine manual.
Contact your Ariens dealer.
Add engine oil. Refer to engine manual.
Clean engine. Refer to engine manual.
Contact your Ariens dealer.
Engage levers. See Move Unit Manually
on page 13.
Contact your Ariens dealer.
Contact your Ariens dealer.
Activate switch by sitting on operator seat.
Contact your Ariens dealer.
Replace deck drive belt. Refer to your
unit's service manual.
Contact your Ariens dealer.
unit's service manual.
Contact your Ariens dealer.
Check tire pressure. See Specifications
on page 23.
Steering Levers on page 18.
Contact your Ariens dealer.
Contact your Ariens dealer.

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IKON-XD Series and is the answer not in the manual?

Questions and answers

Table of Contents

Save PDF