Supermicro X10QRH+ User Manual page 13

Jumper Description
J13 Power-Fail Trigger Thermal Throttling Enable
JBT1 Clear CMOS/Reset BIOS Confi guration
JPG1 VGA Enable
JPME2 Manufacture (ME) Mode Select
JPT1 Trusted-Platform Module (TPM) Enable
JWD1 Watch Dog
X10QRH+ Motherboard Connectors
Connector Description
Battery (JBAT1) Onboard CMOS battery (See the Note on P. 1-3.)
COM1 Backplane COM port
FAN1-FAN10 System cooling fan headers (FAN1-FAN10)
J3/J12 SMC-proprietary main power connection headers
JF1 Front panel control header
JIPMB1 4-pin external BMC I
JL1 Chassis intrusion header
JNVI 2 C3/4 System Management Bus (SMB) for non-volatile memory
headers (JP12/JP11)
JPWR1-3 8-pin power connectors 1-3 for backplane use
JPWR4-7 8-pin power connectors 4/5/6/7 used for GPU devices
JSD1/JSD2 SATA DOM (Disk_On_Module) power connectors
JSTBY1 Standby power header
JTPM1 TPM (Trusted Platform Module)/Port 80 header
(IPMI) LAN IPMI_dedicated LAN
I-SATA0-3 I-SATA 0-3 connections supported by the Intel PCH
I-SATA4/5 I-SATA 4/5 connectors with power pins built-in with support of
SuperDOMs (Devices-on-Module)
S-SATA0-3 S-SATA 0-3 connections supported by the Intel PCH
(CPU3) Slot1 PCI-E 3.0 x16 Slot supported by CPU3 (used for SMC-
proprietary add-on cards)
(CPU4) Slot2 PCI-E 3.0 x16 Slot supported by CPU4 (used for SMC-
proprietary add-on cards)
SP1 Internal buzzer/speaker
SXB2 PCI-E 3.0 x8 in x16 slot supported by CPU1
SXB1A/1B/1C PCI-E 3.0 x32 slot supported by CPU1 (used for SMC-
proprietary riser cards)
X10QRH+ Motherboard Jumpers
2 C header (for an IPMI Card)
1-5
Chapter 1: Overview
Default Setting
Pins 2-3 (Enabled)
See Chapter 2
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Reset)