What To Do If; If The Carriage Has Jammed - Silver Reed SK890 Instruction Book

If the Carriage has jammed ...
1. Remove the yarn from the Yarn Feeder.
2. Push the Release Lever in the arrow direction. and the top of
the Carriage lifts up.
If the yarn has entangled with the Brushes on the Arm or
Yarn Feeder, remove the Arm from the Carriage and disen-
tangle the yarn.
3. With the top of the Carriage up. move the Carriage in the
direction it was going till it gets clear of the knitting.
If the Point Cams are in use, move the Carriage until Jt
passes the Cam.
4. Check the stitches. and if stitches have moved behind the
latches. replace th-em into the hooks using a Transfer Tool.
5. Align the working needles in B position and unravel the
incomplete row referring to page 46.
6. With the top of the Carriage up. pass the Carriage to the side
with the yarn end. Press down the top of the Carriage and
continue to knit.
- 49 -
If the Row Counter, the Knit Contour (Radar) and/ or the
Pattern Card is/ are in use, refer to ''lf incorrectly knitted. .. "
on page 51
~
52 before continuing to knit.