Pioneer DEH-X8600BT/XNEW5 Service Manual
  1. Manuals
  2. Brands
  3. Pioneer Manuals
  4. Car Receiver
  5. DEH-X8600BT/XNEW5
  6. Service manual

Pioneer DEH-X8600BT/XNEW5 Service Manual

Cd rds receiver
Hide thumbs
Table of Contents

Advertisement

Quick Links

CD RDS RECEIVER
DEH-X8600BS
DEH-X8600BT
DEH-X8650BT
DEH-X8650BT
This service manual should be used together with the following manual(s):
Model No.
Order No.
CRT4759
CX-3287
PIONEER CORPORATION
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2013
Mech. Module
S11.6STD
CD Mech. Module : Circuit Descriptions, Mech. Descriptions, Disassembly
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan
DEH-X8600BS/XNUC
/XNEW5
/XNGS
/XNCS
Remarks
ORDER NO.
CRT5430
/XNUC
K-ZZZ SEPT. 2013 Printed in Japan

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DEH-X8600BT/XNEW5 and is the answer not in the manual?

Questions and answers

Related Manuals for Pioneer DEH-X8600BT/XNEW5

Summary of Contents for Pioneer DEH-X8600BT/XNEW5

  • Page 1 PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 PIONEER CORPORATION 2013 K-ZZZ SEPT.

  • Page 2: Safety Information

    SAFETY INFORMATION CAUTION This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair complex products such as those covered by this manual. Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty.
  • Page 3 Laser diode characteristics Wave length : 785 nm to 814 nm Maximum output : 1 190 µW(Emitting period : unlimited) Additional Laser Caution Transistors Q101 in PCB drive the laser diodes. When Q101 is shorted between their terminals, the laser diodes will radiate beam. If the top cover is removed with no disc loaded while such short-circuit is continued, the naked eyes may be exposed to the laser beam.

  • Page 4: Table Of Contents

    CONTENTS SAFETY INFORMATION............................. 2 1. SERVICE PRECAUTIONS ..........................5 1.1 SERVICE PRECAUTIONS ........................5 1.2 NOTES ON SOLDERING .......................... 5 2. SPECIFICATIONS ............................6 2.1 SPECIFICATIONS ............................. 6 2.2 DISC/CONTENT FORMAT ........................11 3. BASIC ITEMS FOR SERVICE........................12 3.1 CHECK POINTS AFTER SERVICING..................... 12 3.2 PCB LOCATIONS ............................

  • Page 5: Service Precautions

    1. SERVICE PRECAUTIONS 1.1 SERVICE PRECAUTIONS 1. You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and should keep the safety during servicing by following the safety instructions described in this manual. 2. Before disassembling the unit, be sure to turn off the power. Unplugging and plugging the connectors during power-on mode may damage the ICs inside the unit.

  • Page 6: Specifications

    2. SPECIFICATIONS 2.1 SPECIFICATIONS DEH-X8600BS/XNUC CD player General System ......Compact disc audio system Power source ....14.4 V DC (10.8 V to 15.1 V al- Usable discs ....Compact disc lowable) Signal-to-noise ratio ..94 dB (1 kHz) (IHF-A network) Grounding system ....
  • Page 7 FM tuner Frequency range ....87.9 MHz to 107.9 MHz Usable sensitivity ..... 9 dBf (0.8 µV/75 , mono, S/N: 30 dB) Signal-to-noise ratio ..72 dB (analog broadcasting) (IHF-A network) AM tuner Frequency range ....530 kHz to 1 710 kHz Usable sensitivity .....
  • Page 8 DEH-X8600BT/XNEW5 CD player General System .......... Compact disc audio system Power source......14.4 V DC (10.8 V to 15.1 V Usable discs ......Compact disc allowable) Signal-to-noise ratio....94 dB (1 kHz) (IEC-A net- Grounding system....Negative type work) Maximum current consumption Number of channels ....
  • Page 9 MW tuner Frequency range...... 531 kHz to 1 602 kHz Usable sensitivity..... 25 µV (S/N: 20 dB) Signal-to-noise ratio....62 dB (IEC-A network) LW tuner Frequency range...... 153 kHz to 281 kHz Usable sensitivity..... 28 µV (S/N: 20 dB) Signal-to-noise ratio....62 dB (IEC-A network) Bluetooth Version ..........
  • Page 10 DEH-X8650BT/XNGS, DEH-X8650BT/XNCS CD player General System ......Compact disc audio system Rated power source ..14.4 V DC Usable discs ....Compact disc (allowable voltage range: Signal-to-noise ratio ..94 dB (1 kHz) (IEC-A network) 12.0 V to 14.4 V DC) Number of channels ..

  • Page 11: Disc/Content Format

    2.2 DISC/CONTENT FORMAT The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by PIONEER CORPORATION is under license. Other trademarks and trade names are those of their respective owners.

  • Page 12: Basic Items For Service

    Volume too low Volume too high Volume fluctuating Sound interrupted 3.2 PCB LOCATIONS CD Core Unit (S11.6STD) Tuner Amp Assy Keyboard Unit A:DEH-X8600BS/XNUC B:DEH-X8600BT/XNEW5 C:DEH-X8650BT/XNGS D:DEH-X8650BT/XNCS Unit Number QWM3782(A) Unit Number Unit Number QWM3783(B) Unit Name Keyboard Unit Unit Number...

  • Page 13: Jigs List

    3.3 JIGS LIST - Jigs List Name Name Jig No. Jig No. Remarks Remarks 16P FFC GGD1310 Tuner Amp Unit - CD Core Unit Test Disc TCD-782 Checking the grating L.P.F. Checking the grating (Two pieces) - Grease List Name Name Grease No.

  • Page 14: Block Diagram

    4. BLOCK DIAGRAM TUNER AMP ASSY RF FRONT END IC IC401 TDA7706 JA401 FMMIXIN1 DACOUTL PINDIN BUZZER LNAIN BZ601 I2CSCL TUSCL I2CSDA TUSDA RSTN TUNRST HIOUT14V REG. IC181 NJW4132U2-A SYNC MUTE ASENS JA101 ISENS SXiPW SXIPW BSENS IC605 Q951 (1/2) TC7SET08FUS1 BSENS SXiRX...
  • Page 15 Q832 NJM2885DL1-05 ILMPW VDCONT TUN5V ILMGND USB DD5V1 IC201 AN33014UA DGND PVCC1 SYNC PVCC2 FLAG USBFLG USBCTL :DEH-X8600BS/XNUC :DEH-X8600BT/XNEW5 SDCTL :DEH-X8650BT/XNGS RSIN :DEH-X8650BT/XNCS JA201 USB5V _ 1 SD33V REG. MED1.2V REG. JA851 Q851 IC721 S-1155B12-U5 VDD33 MED1.2V VOUT VDD33 Q852...
  • Page 16 Q1635 (1/2) (2/2) (1/2) (2/2) RGBCK Q1639 RGBST (1/2) Q1632 D1631, DGND D1632, D1633, D1634 (2/2) ILM+B Q1632 RED LCD GREEN LCD ILMGND BLUE LCD (1/2) Q1633 Q1637 Q1640 Q1638 DSENS Q1633 (2/2) D1635 ILM+B :DEH-X8600BS/XNUC :DEH-X8600BT/XNEW5 :DEH-X8650BT/XNGS :DEH-X8650BT/XNCS DEH-X8600BS/XNUC...

  • Page 17: Diagnosis

    5. DIAGNOSIS 5.1 OPERATIONAL FLOWCHART Power ON Vcc = 3.3 V Pin 14, 60 BSENS Pin 16 BSENS = L ASENS Pin 18 ASENS = L DSENS Pin 17 DSENS = L Starts communication with Grille microcomputer. 500 ms SWVDD<-H Pin 47 500 ms In case of the above signal, the communication...

  • Page 18: Error Code List

    5.2 ERROR CODE LIST ERROR CODES If a CD memory device is inoperable, or operation of such media is stopped by an error, the error mode is established and a cause of the error is displayed by an error code. Indication of error codes is intended to reduce the number of calls from customers and facilitate failure analysis and repair work in servicing.
  • Page 19 USB storage device/iPod Message Cause Action Message Cause Action NO DEVICE No USB storage Connect a com- CHECK USB The iPod oper- Make sure the device or iPod is patible USB stor- ates correctly connection cable connected. age device/iPod. but does not for the iPod has charge.
  • Page 20 Start up Connection to Follow the in- Pioneer Service Pandora. the Pandora ap- structions that ap- Station. Press BAND plication failed. pear on the key to retry.
  • Page 21 The channel Check the contact your deal- able that you have SiriusXM channel er or an author- requested is not lineup. ized Pioneer a valid SiriusXM Service Station channel. for assistance. Not Sub- The channel Check the con- Check Tuner...

  • Page 22: Connector Function Description

    5.3 CONNECTOR FUNCTION DESCRIPTION FRONT OUTPUT REAR OUTPUT MICROPHONE INPUT FM/AM ANTENNA SUBWOOFER OUTPUT Sirius XM BUS INPUT(X8600BS only) 15 13 11 9 7 5 3 1 WIRED REMOTE CONTROL INPUT 16 14 12 10 8 6 4 2 1 FL+ 9 NC 10 NC 2 FR+...

  • Page 23: Service Mode

    6. SERVICE MODE 6.1 DISPLAY TEST MODE Service Display Test Mode 1. Overview This is the test mode which summarized the confirmation of the system microcomputer version and the all light ON/OFF functions of a display part. 2. Operation method Turn on BUP and ACC while pressing [PHONE] + [BAND] together.
  • Page 24 3. Contents to be displayed Display test mode selection screen 0 8 16 24 32 40 48 56 64 72 80 88 96 04 12 20 28 36 44 52 60 68 76 84 92 - M o d e S e l e c t - TEST D I S P...
  • Page 25 All lights OFF 8 16 24 32 40 48 56 64 72 80 88 96 04 12 20 28 36 44 52 60 68 76 84 92 If noise appears on the screen: There might be abnormality in the display microcomputer or a problem, for instance, in connection between the display microcomputer and the OEL driver.

  • Page 26: Cd Test Mode

    6.2 CD TEST MODE - Flow Chart To enter the test mode: [EJECT] + [BAND] -> BUP + ACC ON Operate with a Remote Control with 1 - 6 keys for a CD Receiver in the test mode. [Key] [CD] or [SOURCE] Source ON Contents Display...

  • Page 27: Disassembly

    7. DISASSEMBLY While the photograph shown is slightly different from this model in shape, the disassembly procedure is the same. - Removing the Panel Assy (Fig.1) Release the seven latches and then remove the Panel Assy. Panel Assy Fig.1 - Removing the CD Mechanism Module (Fig.2) Remove the screw.
  • Page 28 - Removing the Tuner Amp Assy (Fig.3) Tuner Amp Assy Remove the two screws. Remove the two screws and then remove the Tuner Amp Assy. Fig.3 - Attention of removing (Fig.4) Don’t remove this screws excluding the dismantlement of the CD Mechanism Module. CD Mechanism Module Fig.4 DEH-X8600BS/XNUC...
  • Page 29 Disassembling the Panel Part (Fig.5, 6) 1. Remove the arm while bending the rib of the panel upward. Fig.5 2. Press the upside hook and the bottom side hook of the button at the same time, and pull out the button. Fig.6 Assembling the Panel Part (Fig.7, 8, 9) 1.
  • Page 30 3. Fit the spring in the groove at the position shown in the figure. 4. Fit the boss on the lower side of the arm in the lower hole of the panel, and then warp the rib on the panel in the direction shown in the figure and fit the boss of the arm in the panel.
  • Page 31 How to carry the mecha unit 1. Hold the designated points (shown with dashed lines) of the upper chassis and the front/rear bracket. 2. Be careful not to hold the solid line portions or the CRG mecha part or insert foreign substances, to prevent distortion. 3.
  • Page 32 How to remove the PU unit 1. Create an empty-clamp state according to “How to create empty clamp state (motor drive)”. 2. Hook the feeding screw biasing spring to a tentative hooking portion (Fig 2b). Be careful not to get injured by the spring edge.

  • Page 33: Each Setting And Adjustment

    8. EACH SETTING AND ADJUSTMENT 8.1 CD ADJUSTMENT 1) Cautions on adjustments 2) Test mode In this product the single voltage (3.3 V) is used for the This mode is used to adjust the CD mechanism module. To enter the test mode. regulator.

  • Page 34: Checking The Grating After Changing The Pickup Unit

    8.2 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT Note : The grating angle of the PU unit cannot be adjusted after the PU unit is changed. The PU unit in the CD mechanism module is adjusted on the production line to match the CD mechanism module and is thus the best adjusted PU unit for the CD mechanism module.
  • Page 35 Grating waveform Ech -> Xch 20 mV/div, AC Fch -> Ych 20 mV/div, AC 0 degrees 30 degrees 45 degrees 60 degrees 75 degrees 90 degrees DEH-X8600BS/XNUC...

  • Page 36: Pcl Output Confirmation

    8.3 PCL OUTPUT CONFIRMATION - PCL Output In the normal operation mode (with the detachable panel installed, the ACC switched ON, the standby mode cancelled), shift the TESTIN IC601 (Pin 61) terminal(TP : TESTIN1) to H. The clock signal is output from the PCL terminal IC601 (Pin 37)(TP : PCL). The frequency of the clock signal is 625.0 kHz that is one 32th of the fundamental frequency (20 MHz).
  • Page 37 DEH-X8600BS/XNUC...

  • Page 38: Exploded Views And Parts List

    9. EXPLODED VIEWS AND PARTS LIST OTES : Parts marked by " * " are generally unavailable because they are not in our Master Spare Parts List. The > mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation.
  • Page 39 See Contrast table (2) 18-6 Installation Manual See Contrast table (2) Handle QNC3021 Screw See Contrast table (2) (2) CONTRAST TABLE DEH-X8600BS/XNUC, DEH-X8600BT/XNEW5, DEH-X8650BT/XNGS and DEH-X8650BT/XNCS are constructed the same except for the following: DEH-X8600BS/ DEH-X8600BT/ DEH-X8650BT/ DEH-X8650BT/ Mark Description...
  • Page 40 * QRB3367 Finnish * QRB3368 Danish * QRB3369 Portuguese * QRB3370 Greek * QRB3371 Turkish All operation manuals are supplied in PDF files by the CD-ROM. Regarding the availability of paper manual, contact Pioneer Service representative in your region. DEH-X8600BS/XNUC...
  • Page 41 DEH-X8600BS/XNUC...

  • Page 42: Exterior

    9.2 EXTERIOR X8600BS/XNUC X8650BT/XNGS X8650BT/XNCS X8600BT/XNEW5 X8600BS/XNUC X8650BT/XNGS X8650BT/XNCS DEH-X8600BS/XNUC...
  • Page 43 See Contrast table (2) Button (PHONE) QAC3143 Sheet QNM3105 Button (DETACH) QAC3146 Sheet QNM3101 Button (EJECT) QAC3147 (2) CONTRAST TABLE DEH-X8600BS/XNUC, DEH-X8600BT/XNEW5, DEH-X8650BT/XNGS and DEH-X8650BT/XNCS are constructed the same except for the following: DEH-X8600BS/ DEH-X8600BT/ DEH-X8650BT/ DEH-X8650BT/ Mark Description XNUC XNEW5 XNGS XNCS...

  • Page 44: Cd Mechanism Module

    9.3 CD MECHANISM MODULE (A) : GEM1024 (B) : GEM1043 DEH-X8600BS/XNUC...
  • Page 45 CD MECHANISM MODULE SECTION PARTS LIST Mark No. Description Part No. Mark No. Description Part No. Damper CNW1198 ..Screw BSZ20P040FTC CNW1726 Screw(M2 x 4) CBA1835 Motor Unit(M2)(LOAD/CRG) CXC4026 Washer CBF1038 Screw Unit CXC8894 Spring CBH3010 Arm Assy CXE6232 Washer CBF1037 Spring CBH2855...

  • Page 46: Schematic Diagram

    10. SCHEMATIC DIAGRAM 10.1 TUNER AMP ASSY(1/2)(GUIDE PAGE) Note: When ordering service parts, be sure to refer to " EXPLODED VIEWS AND PARTS LIST" or "ELECTRICAL PARTS LIST". Large size SCH diagram uCOM_BUS uCOM_BUS E.VOL C151 1u/10 POWER_BUS POWER_BUS TUNL C153 0.22u/16 TUNL...
  • Page 47 TUNER AMP ASSY(1/2) E.VOL DEH-X8600BS/XNUC DEH-X8600BT/XNEW5 DEH-X8650BT/XNGS DEH-X8650BT/XNCS FM/AM(30%) (A,C,D): -15.00 dBs FM/AM(30%) (A,C,D): -2.00 dBs 2125 C305 R305 FM/AM(30%) (B): -11.00 dBs FM/AM(30%) (B):+2.00 dBs SXi:+2.2 dBs SXi:+14.2 dBs CCG1192-A 10U/10 JA301 AUX:+2.2 dBs AUX:+14.2 dBs CD/USB/SD/APP(iPhone):+3.04 dBs CD/USB/SD/APP(iPhone):+14.04 dBs XKB7001- BT Audio/APP(Android):+3.04 dBs...
  • Page 48 PREOUT DEH-X8600BS/XNUC...
  • Page 49 POWER SUPPLY DEH-X8600BS/XNUC...
  • Page 50 DEH-X8600BS/XNUC...
  • Page 51 DEH-X8600BS/XNUC...

  • Page 52: Tuner Amp Assy(2/2)(Guide Page)

    10.2 TUNER AMP ASSY(2/2)(GUIDE PAGE) MECHA VD Q771 VD7.4V KTD2092 7.4V Q772 R773 C2 3 B1 2 5 B2 E1 1 6 C1 RN4983 VDCONT VDCONT VDSENS SDWP PD14 PD15 C654 CD MECHA PVCC1 0.1u/16 VDD33 CN751 VDD33 VSS1 VKN1192-A R756 220 CDSRQ CDSRQ...
  • Page 53 TUNER AMP ASSY(2/2) uCOM_BUS DEH-X8600BS/XNUC DEH-X8600BT/XNEW5 DEH-X8650BT/XNGS L653 DTL1107-A 3.3V VDD33 DEH-X8650BT/XNCS POWER_BUS CD/USB/SD/APP(iPhone):+3.04 dBs BT Audio/APP(Android):+3.04 dBs R373 C700 BT Phone: -5.96 dBs DACMUTE R371 DEEMPH L371 TUN5V DACMCK DTL1107 R372 DACLRCK DACDATA DQMU DACBCK R391 DQMU TUN5V WE0/DQML...
  • Page 54 DEH-X8600BS/XNUC...
  • Page 55 DEH-X8600BS/XNUC...
  • Page 56 DEH-X8600BS/XNUC...
  • Page 57 DEH-X8600BS/XNUC...

  • Page 58: Keyboard Unit

    10.3 KEYBOARD UNIT AUX:+2.2 dBs L1781 CTF1389-A JA1781 R1781 1608 1601~1610 CONNECTOR YKN5006-A L1782 CTF1389-A 1611~1620 ROTARY ENCODER R1782 1608 1621~1630 RGB DRIVER L1783 1631~1680 RGB ILM 1608 R1783 1608 1608 1701~1730 GRILLE MICRO & RO CN1601 C1781 C1782 CKS6451 4700p/50 4700p/50 ILMGND...
  • Page 59 DGND R1707 L_DC R1708 L_RST L_CSB R1717 R1716 DGND R1715 ROMCE R1709 BUSY HOLD R1713 R1714 IC1702 DEH-X8600BS/XNUC BYTE DEH-X8600BT/XNEW5 VSS2 DEH-X8650BT/XNGS SWVDD 3.3V DEH-X8650BT/XNCS C1756 CCG1205- 2.2u C1758 C1706 RESET 2125 RESET C1757 0.01u/16 DGND RY/BY C1759 Q1638 Q1640...

  • Page 60: Cd Core Unit (S11.6Std)

    10.4 CD CORE UNIT (S11.6STD) PICK UP UNIT(P10.6) (SERVICE) CXX3556 V3R3 E:P5+P10 F:P1+P6 PUEN Q102 LTA123JUB Q101 R109 2.2k 2SA1577(QR) V+3A ATEST V+3A P5+P10 P1+P6 REFO VREF A.VDD1 C221 A.GND1 0.1u/10 C216 1800p/50 RFAGC AGCO C220 HOLOGRAM UNIT 0.1u/10 C219 AGCI 0.1u/10 FOCUS ACT...
  • Page 61 CD CORE UNIT (S11.6STD) C302 C303 1000p/50 1000p/50 PUEN C304 0.022u/16 C305 0.1u/10 R310 4.7k R311 4.7k R312 4.7k R313 4.7k TEMP TEMP R215 TH201 TESTIN Mask Flash ATEST R232 R281 R282 R291 R294 BSCK0 /WAIT A.VDD1 A.GND1 C216 R291 1800p/50 LRCK AGCO...

  • Page 62: Waveforms

    10.5 WAVEFORMS - CD CORE UNIT(S11.6STD) Note : 1. The encircled numbers denote measuring points in the circuit diagram. 2. Reference voltage REFO1(1.65 V) 1DSCSNS 1DSCSNS 5 V/div 500 ms/div 5 V/div 500 ms/div 3HOME 5CLCONT 5 V/div 5 V/div 4LOEJ 4LOEJ 5 V/div...
  • Page 63 fRFAGC fRFAGC gLRCK 1 V/div 2 ms/div 1 V/div 200 ms/div 2 V/div 10 us/div hBCLK 500 mV/div 1 V/div 2 V/div 9TIN 8CIN 500 mV/div 500 mV/div DOUT(DATA) 2 V/div 7SIN 2 V/div 32 Tracks Jump waveform Search operation(Outter to Inner) Digital Out waveform (Zoom of 100 Track Jump waveform) Ref.:...

  • Page 64: Pcb Connection Diagram

    11. PCB CONNECTION DIAGRAM 11.1 TUNER AMP ASSY NOTE FOR PCB DIAGRAMS TUNER AMP ASSY 1.The parts mounted on this PCB include all necessary parts for several destination. For further information for respective destinations, be sure to check with the schematic dia- gram.
  • Page 65 SIDE A > P 471 (A,123,97) Fuse 1.25 A CEK1382 JA101 IC321 POWER SUPPLY L981 JA981 VA101 JA201 R953 R951 D981 VA104 R962 R956 D982 R954 R355 R952 R963 Q951 C340 D951 L971 R218 R154 L201 R219 Q321 R238 L221 R156 R239 C169...
  • Page 66 TUNER AMP ASSY C339 C102 D992 VA105 C101 C991 VA102 VA202 VA201 VA222 VA221 R109 R108 VA103 R102 R991 C961 C951 C962 R955 D991 R961 D961 C155 C157 C156 C158 D181 C190 C182 R420 C186 C154 R421 R422 R423 D471 C502 C462 C501...
  • Page 67 SIDE B C121 C339 C336 C318 C338 C315 C337 C335 C344 C123 C352 R330 R353 C122 C314 D202 C217 C378 D563 C731 R561 R732 D562 C374 L731 R699 C893 C708 R678 C699 C678 C676 C673 R701 R666 C672 C675 D902 R667 C705 R901...

  • Page 68: Keyboard Unit

    11.2 KEYBOARD UNIT KEYBOARD UNIT SIDE A C1661 C1662 C1663 R1732 C1731 C1642 C1640 C1641 DEH-X8600BS/XNUC...
  • Page 69 KEYBOARD UNIT SIDE B C1781 C1758 L1751 C1756 C1702 C1753 R1751 C1751 CN802 R1720 R1719 R1733 R1741 C1703 R1611 R1636 R1634 R1647 C1612 R1646 DEH-X8600BS/XNUC...

  • Page 70: Cd Core Unit (S11.6Std)

    11.3 CD CORE UNIT (S11.6STD) CD CORE UNIT (S11.6STD) SIDE A PICK UP UNIT(P10.6) (SERVICE) R254 TH201 LOADING/CARRIAGE C235 CN101 MOTOR R232 R246 HOME C102 S901 C201 D101 CN702 R253 R245 C238 C240 C710 R706 C205 R297 C299 C705 C707 C220 R702 R701...
  • Page 71 CD CORE UNIT (S11.6STD) SIDE B C104 Q102 R108 Q101 C202 X201 R109 R294 C203 C239 C209 C225 C101 C110 C233 C111 R237 C224 C210 C223 C211 R240 R282 C284 C204 R281 C222 IC201 C281 C218 C301 C282 R216 R218 C219 R229 C217...

  • Page 72: Electrical Parts List

    The expression of the unit in this manual is shown by u instead of µ. Please do not make a mistake. Circuit Symbol and No. Part No. Circuit Symbol and No. Part No. IC 601 (A,106,65) IC(A) PEQ265A8 A:DEH-X8600BS/XNUC (A,106,65) IC(B,D) PEQ267A8 B:DEH-X8600BT/XNEW5 (A,106,65) IC(C) PEQ329A8 C:DEH-X8650BT/XNGS IC 603 (A,127,46) IC S-80827CNMC-B8M IC 604 (A,101,82) IC(A) TC7SH126FU D:DEH-X8650BT/XNCS...
  • Page 73 Circuit Symbol and No. Part No. Circuit Symbol and No. Part No. D 352 (A,61,131) Diode DZ2J082M0 VA807 (B,122,22) Varistor EZJZ1V270RM VA808 (B,120,12) Varistor EZJZ1V270RM D 353 (A,63,131) Diode DAN202UM CN251 (A,48,34) Connector CKS6346 D 401 (A,149,102) Diode RN731VN CN751 (A,116,38) Connector VKN1192 D 402...
  • Page 74 Circuit Symbol and No. Part No. Circuit Symbol and No. Part No. R 301 (A,8,129) RS1/16SS820J R 609 (A,92,71) RS1/16SS104J R 302 (A,14,129) RS1/16SS820J R 610 (A,99,76) RS1/16SS104J R 303 (A,17,129) RS1/16SS820J R 611 (A,93,60) RS1/16SS104J R 304 (A,22,129) RS1/16SS820J R 612 (A,93,58) RS1/16SS104J...
  • Page 75 Circuit Symbol and No. Part No. Circuit Symbol and No. Part No. R 693 (A,56,64) (B,C,D) RS1/16SS221J R 854 (A,70,37) (B,C,D) RS1/16SS221J R 695 (B,77,67) RS1/10SR473J R 855 (B,67,44) (B,C,D) RS1/10SR221J R 701 (B,43,76) RS1/10SR473J R 856 (B,69,44) (B,C,D) RS1/10SR221J R 702 (A,43,79) RS1/16SS472J...
  • Page 76 Circuit Symbol and No. Part No. Circuit Symbol and No. Part No. C 159 (A,74,110) CKSRYB105K10 C 338 (B,63,143) 10 uF CCG1236 C 160 (A,87,109) CKSRYB105K10 C 339 (B,88,143) CKSRYB104K16 C 161 (A,74,109) 2.2 uF CCG1205 C 340 (A,128,123) 3 300 uF/16 V CCH1486 C 163 (A,75,115) CKSRYB105K10...
  • Page 77 Circuit Symbol and No. Part No. Circuit Symbol and No. Part No. C 741 (A,77,51) (A,B) CKSSYB104K10 C 459 (A,128,84) (A) CCSSCH100D50 C 752 (A,120,34) CCSSCH220J50 C 466 (B,139,92) CCSRCH101J50 C 753 (A,121,41) CCSSCH100D50 C 467 (A,148,110) (A) CCSSCK2R0C50 C 601 (A,92,68) CCSSCH100D50 C 754...
  • Page 78 Circuit Symbol and No. Part No. Circuit Symbol and No. Part No. Q 1635 (B,17,26) Chip Transistor HN1C01FU R 1702 (B,68,21) RS1/16SS102J Q 1636 (B,53,14) Transistor LSCR523UB R 1703 (B,68,20) RS1/16SS154J R 1704 (A,85,19) RS1/16SS473J Q 1637 (B,139,21) Transistor LSCR523UB Q 1638 (B,139,26) Transistor LSCR523UB...
  • Page 79 Circuit Symbol and No. Part No. Circuit Symbol and No. Part No. Q 102 (B,15,54) Transistor LTA123JUB C 220 (A,18,38) CKSSYB104K10 X 201 (B,25,49) Ceramic Resonator 16.934 MHz CSS1603 C 221 (B,14,32) CKSSYB104K10 S 901 (A,42,53) Spring Switch(HOME) CSN1080 C 222 (B,13,37) CKSSYB104K10 S 903...

This manual is also suitable for:

Deh-x8650bt/xngsDeh-x8600bs/xnucDeh-x8650bt/xncs

Table of Contents