Pro-face CA3-USBCB-01 Installation Manual

Pro-face CA3-USBCB-01 Installation Manual

Usb data transfer cable

Advertisement

USB Data Transfer Cable
This guide contains a variety of safety markings related to the safe and correct opera-
tion of the USB Data Transfer Cable. Be sure to read this guide and any related manu-
als carefully to fully understand how to correctly use this cable.
Safety Symbol
This guide uses the following safety-related symbol. Please pay attention to this sym-
bol and follow the instructions given.
• Do not disassemble or remodel this cable in any way. Doing so may cause an electric
shock or fire.
• Do not use this cable in areas where flammable gases are present. Doing so may cause
an explosion.
To Prevent USB Data Transfer Cable Damage
• Do not use the USB Data Transfer Cable at temperatures outside the range specified
in this guide.
• Do not use or store this cable at very high temperatures.
• Do not use or store this cable in direct sunlight or excessively dusty or dirty environ-
ments.
• Do not use or store this cable in an environment where it may be exposed to chemical
vapors or fumes.
CA3-USBCB-01
Installation Guide
Safety Precautions
Indicates situations that may result in major machine dam-
age, severe bodily injury, or death if the instructions are not
followed.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CA3-USBCB-01 and is the answer not in the manual?

Questions and answers

Summary of Contents for Pro-face CA3-USBCB-01

  • Page 1 USB Data Transfer Cable CA3-USBCB-01 Installation Guide Safety Precautions This guide contains a variety of safety markings related to the safe and correct opera- tion of the USB Data Transfer Cable. Be sure to read this guide and any related manu- als carefully to fully understand how to correctly use this cable.
  • Page 2: Package Contents

    The USB Data Transfer Cable's driver is contained on the CD-ROM of the screen cre- ation software used for your AGP unit; such as Pro-Designer. For driver installation instructions, please refer to this software’s online help. The USB Data Transfer Cable (CA3-USBCB-01) is NOT compatible with GP-PRO/ PBIII C-Package. Corresponding Products...
  • Page 3: Specifications

    Specifications General I/F Type USB (Specification Rev1.1) Connector Type USB (Series A Plug) Electrical 5V DC Rated Voltage (Powered from USB bus) Power 0.7W (Max) Consumption Environmental Ambient C to 50 Temperature Storage C to +60 Temperature 10% to 90%RH Ambient Humidity (No condensation, wet bulb temperature: 39...
  • Page 4: Installation

    The USB Data Transfer Cable's driver is contained on the CD-ROM of the screen cre- ation software used for your AGP unit; such as Pro-Designer. For driver installation instructions, please refer to this software’s online help. The USB Data Transfer Cable (CA3-USBCB-01) is NOT compatible with GP-PRO/ PBIII C-Package.
  • Page 5: Troubleshooting

    All Company/Manufacturer names used in this installation guide are the registered trademarks of those companies. © 2004 Digital Electronics Corporation. All rights reserved. .CA3-USBCB-01-MT01-CP /A...

Table of Contents