Page 2
“AS IS” basis, without warranties of any kind. This document and all information discussed in this document remain the sole and exclusive property of Samsung. No license of any patent, copyright, mask work, trademark or any other intellectual property right is granted by this document, express or implied, by estoppels or otherwise.
What’s In the Box ............................5 How to Connect / Disconnect......................... 5 System Requirements ............................. 6 Capacity of T7 Touch Displayed on the System ....................6 Using T7 Touch ........................7 Connecting T7 Touch ............................7 Disconnecting T7 Touch ..........................7 Motion LED behavior by product status ......................
Secure with a touch Keep your private files secure without sacrificing convenience. The built-in security options on the T7 Touch utilize the AES 256-bit encryption and give you the option of unlocking with a touch of your finger or with a password.
Getting Started Before using the Samsung Portable SSD T7 Touch (referred to as “T7 Touch”), please read this User Manual thoroughly so that you may know how to use the product in a safe and appropriate manner. What’s In the Box •...
* Performance may vary depending on user’s system to which T7 Touch is connected. Even when using USB 3.2 Gen 2 connections, T7 Touch may not perform well if your system does not support UASP (USB Attached SCSI Protocol). Please make sure that your system supports UASP.
Unplugging from computer without performing Safely Remove Hardware feature may cause data losses or damages to the T7 Touch. * Samsung shall not be liable for loss of user data or product damages caused by user’s failure to comply with this instruction.
Page 8
T7 Touch to be restored to factory setting through online service rendered by our customer service centers. Please keep it in mind that all user data placed in T7 Touch will be lost by factory reset. Please be cautious not to forget your password.
Page 9
* Samsung shall not be liable for loss of user data caused by forgotten or stolen passwords. In an effort to keep the device as secure as possible, there is no password recovery option. If the password is forgotten, users need to have T7 Touch to be restored to factory setting through online service rendered by our customer service centers.
Page 10
OS meets the system requirements and supports security mode. * If security mode is enabled, only the capacity of security partition in the T7 Touch will be initially displayed. This security partition is approximately ~128 MB. Once you tap your fingerprint or enter your password and unlock successfully, the full capacity of T7 Touch will be displayed in your system.
Page 11
4. Change in Settings You can change your security mode/user name/password/fingerprint security settings of the T7 Touch by clicking “SETTINGS” button on the main page. When using a computer without the security software, you can download installation file (“SamsungPortableSSD_Setup_Win_1.0.exe” for Windows OS, “SamsungPortableSSD_Setup_Mac_1.0.pkg”...
Page 12
Name/Password • You can change Name and Password. For changing password, please click “CHANGE” button.
Page 13
Fingerprint security settings • If you’ve enabled fingerprint security mode, you can manage fingerprint settings by clicking “EDIT” button ( Enter the current password and click “CONFIRM” button ( ) to move to the fingerprint management step. By clicking “ADD FINGERPRINT” button ( ), you can add fingerprints.
Page 15
When registering a fingerprint, the first Fingerprint 1 to 4 is created. You can rename ) or delete ( ) the registered fingerprint.
Page 16
By clicking “Check for Update Automatically” toggle button ( ), you can choose whether to have SW and FW automatically updated whenever Samsung Portable SSD is connected. By clicking refresh button ( ), you can refresh update status. By clicking arrow down button ( ), you can see detail information on the applicable...
Page 17
/formatting partition, while FW is being updated, may cause abnormal behavior of or damage to the T7 Touch. * Once FW has been updated, please disconnect and reconnect T7 Touch to ensure that the FW update was successful. 6. Delete “Samsung Portable SSD Software”...
Page 18
T7 Touch to be restored to factory setting through online service rendered by our customer service centers. Please keep it in mind that all user data placed in T7 Touch will be lost by factory reset. Please be cautious not to forget your password or use security mode with fingerprint.
Page 19
4. Unlock T7 Touch If you’ve enabled security mode, every time you connect T7 Touch to your device, you need to tap your fingerprint or enter your password and press the “UNLOCK” button before getting access to the data in T7 Touch.
Page 20
5. Home Screen If security mode is not enabled in your T7 Touch, you can enter to Setting screen by clicking one of the two areas. 6. Settings Screen You can change the user name of T5 or password, fingerprint security settings and turn...
Page 21
UPDATE button will show the link to ‘App store’. * Firmware update requires connection to computer. 8. Deleting “Samsung Portable SSD” Application on Android Open your android device’s Settings app and tap Apps or Application manager. Tap “Samsung Portable SSD”...
Please follow the following safety guidelines to prevent virus infections. Install an anti-virus program on the computer to which the T7 Touch is connected, and perform virus scans on a regular basis. Always update the operating system and the anti-virus software with the latest version.
The T7 Touch was developed for use with Windows OS and Mac OS PCs and mobile devices. When connected to devices other than those, the T7 Touch may not be recognized or use of its features may When I connect the T7 Touch to be restricted depending on their level of support.
System Specifications 5.1) or higher * Max data transfer speed is measured based on Samsung’s internal testing standards with the enclosed USB cable. Performance may vary depending on host configuration. To reach maximum transfer speeds of 1,050 MB/s, the host device and connection cables must support USB 3.2 Gen 2 and UASP mode must be enabled.
Unique Identifier: Check the label on the product Responsible Party: Samsung Electronics America QA Lab 19 Chapin Rd. Building D Pine Brook NJ 07058 Tel: 1-973-808-6362, Fax: 1-973-808-6361...
WEEE (Waste Electrical and Electronic Equipment) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Need help?
Do you have a question about the T7 Touch and is the answer not in the manual?
Questions and answers