Advertisement
Quick Links
Indoor Fixed w/IR (ADC-V522IR) - Installation Guide
Pre-installation checklist
• ADC-V522IR camera (included)
• AC Power adapter (included)
• Ethernet or Wireless (2.4 or 5 GHz) connection to broadband (Cable, DSL, or Fiber Optic) Internet
• A computer, tablet or smartphone with Wi-Fi is required if the router does not have the Wi-Fi Protected Setup
(WPS) feature
• Login and password for the Alarm.com account to add the camera to
Note: There are three local options for connecting the ADC-V522IR to the network: Ethernet Mode, Wi-Fi Protected
Setup (WPS) Mode, and Access Point (AP) Mode.
For information about how to install a video device via MobileTech, see
For information about how to reconnect a camera to a network and troubleshooting, see
network if the router, network equipment, or wireless settings
Ethernet mode
1. Using an Ethernet cable, connect the camera to the network.
2. Connect the camera's AC power adapter and plug it into a non-switched outlet.
3. Add the device to the account by either selecting the account in MobileTech, or by using a web browser and
entering the following URL: www.alarm.com/addcamera
4. Select the camera from the video device list or type in its MAC address to begin adding the camera. The camera's
MAC address is located on the back of the camera.
5. Follow the on-screen instructions to finish adding the camera.
6. If the camera is going to be wireless, set up the wireless network once the camera is added to the account. To
program the new wireless information:
a. Click Setup wireless now.
▪ If performing from the home page of the Customer Website:
i. Click Video.
ii. Click Settings.
iii. If there are multiple cameras on the account, select the camera to update using the Video
Device dropdown menu.
iv. Click Wireless Network, then continue with the following steps.
b. Verify the camera to update is selected in the dropdown for Video Device, then click Scan.
https://answers.alarm.com/Installation_and_Troubleshooting/Video_Devices/Indoor_Fixed_w%2F%2FIR_ADC-V522IR/Indoor_Fixed_w%
Install a video device using the MobileTech
change.
Reconnect a camera to a Wi-Fi
Updated: Fri, 21 Sep 2018 18:29:15 GMT
app.
1
Advertisement
Related Manuals for Alarm.Com ADC-V522IR
Summary of Contents for Alarm.Com ADC-V522IR
- Page 1 (WPS) feature • Login and password for the Alarm.com account to add the camera to Note: There are three local options for connecting the ADC-V522IR to the network: Ethernet Mode, Wi-Fi Protected Setup (WPS) Mode, and Access Point (AP) Mode.
- Page 2 2. Press and hold down the WPS button for about three seconds, then release when the LED begins to flash blue. 3. Activate the WPS Mode on the router. The ADC-V522IR begins to connect to the wireless network. The LED is solid green when the connection is complete.
- Page 3 To enter WPS mode, push the WPS button and release when flashing blue (about three seconds). To add WPS Mode the camera to the user's router and account using WPS, see mode. https://answers.alarm.com/Installation_and_Troubleshooting/Video_Devices/Indoor_Fixed_w%2F%2FIR_ADC-V522IR/Indoor_Fixed_w% Updated: Fri, 21 Sep 2018 18:29:15 GMT...
-
Page 4: Troubleshooting
Press and hold the WPS button for about 15 seconds until the LED is flashing green and red, then release the button. The camera reboots with factory defaults. If the camera was previously installed to an Alarm.com account, it needs to be deleted before it can be installed again.
Need help?
Do you have a question about the ADC-V522IR and is the answer not in the manual?
Questions and answers