Related Manuals for Steelcraft MATISSE HI LO
Summary of Contents for Steelcraft MATISSE HI LO
- Page 1 MATISSE HI LO HIGHCHAIR IMPORTANT: KEEP THIS BOOKLET IN A SAFE PLACE FOR FUTURE REFERENCE. www.britax.com.au Series No. Q1...
- Page 2 WARNINGS ALWAYS FOLLOW THE MANUFACTURERS INSTRUCTIONS. READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND USE OF THIS HIGHCHAIR. THE CORRECT USE AND MAINTENANCE OF THIS PRODUCT IS ESSENTIAL. WARNING: THE CHILD SHOULD BE SECURED IN THE HIGHCHAIR AT ALL TIMES BY THE HARNESS, EITHER IN THE RECLINING OR UPRIGHT POSITION.
- Page 3 WARNINGS WARNINGS: • Never carry the highchair with the child in it. • Do not use the highchair without the tray and always ensure the tray is secure on the arm rests.The tray is not designed to hold the child in the chair.
-
Page 4: Parts List
PARTS LIST 1. Backrest recline lever 2. Shoulder harness clip slot 3. Seat cover retention hooks 4. Rear leg release button 5. Seat height adjustment latch 6.Tray storage hook 7. Castor 8. Five-Point harness 9.Tray 10.Tray release latch 11.Tray lock latch 12. - Page 5 HIGHCHAIR ASSEMBLY 1. ASSEMBLING THE HIGHCHAIR A Remove the highchair from the box. B Raise the seat up to the highest position. C Press in and hold both rear leg release buttons inside the side rings and at the same time pull the lower leg moulding back with your foot to assist with openingthe high chair.
-
Page 6: Using The Tray
HIGHCHAIR OPERATION 2. USING THE TRAY WARNING: THE TRAY IS NOT DESIGNED TO HOLD THE CHILD IN THE HIGH CHAIR. THE CHILD IS TO BE SECURED BY THE SAFETY HARNESS AT ALL TIMES WHILE IN THE HIGH CHAIR. A To attach the tray, line up the bar on the tray with holes in the armrests. Pull the tray release latch under the tray outward and slide the tray in. -
Page 7: Using The Harness
HIGHCHAIR OPERATION D The tray can be rotated up for easy storage. Pull out the tray to the furtherest position (you can see the red dots on the tray bar). E Push the tray lock latch up and lift the tray at the same time. F The tray can be stored back of the high chair. - Page 8 HIGHCHAIR OPERATION WARNING: DO NOT ADJUST WITH THE CHILD IN THE CHAIR. 4. ADJUSTING THE BACKREST A Pull backrest lever up to adjust backrest upwards and downwards. B To adjust the footrest, just lift the footrest up for up position. For down position, push down footrest adjustment latches on both sides and pull down footrest at the same time.
- Page 9 HIGHCHAIR OPERATION 6. TO ADJUST THE SHOULDER STRAPS PLEASE NOTE: The shoulder straps can be positioned at two heights. Choose a shoulder strap height that is close to the child’s shoulders. A The high chair seat has 2 sets of harness slots at different heights to accommodate the child.
- Page 10 HIGHCHAIR OPERATION 7. FOLDING THE HIGHCHAIR WARNING: REMOVE THE CHILD FROM THE HIGHCHAIR BEFORE A Remove the child and tray from the highchair. Press in the rear leg release buttons. Lift rear of frame and fold forward. If you want to lower the seat please refer to page 8.
-
Page 11: Care And Maintenance
• To maintain the safety of your nursery product, seek prompt repairs for bent, torn, worn or broken parts. Use only those parts and accessories approved by Steelcraft. • Always check parts regularly for tightness of screws, nuts and other fasteners - tighten if required. - Page 12 Due to our continuing program of development, Britax reserves the right to alter the specifications, colour or design without any further notice. The Steelcraft trademark is the property of Britax Childcare Pty.Ltd - Australia. The Britax trademark is the property of Britax Childcare Holdings Limited - UK.
Need help?
Do you have a question about the MATISSE HI LO and is the answer not in the manual?
Questions and answers