ARAG BRAVO 300S Series Installation Manual
Hide thumbs
Also See for BRAVO 300S Series:
- Quick reference manual (2 pages) ,
- Installation, use and maintenance manual (52 pages) ,
- Directions for installation, use and maintenance (43 pages)
Subscribe to Our Youtube Channel
Related Manuals for ARAG BRAVO 300S Series
Summary of Contents for ARAG BRAVO 300S Series
- Page 1 BRAVO 300S SERIES COMPUTER CROP SPRAYING • RCU: 46732xx1 • SEQUENTIAL RCU: 46732Dx1 Software rel. 2.0x installation...
-
Page 2: Legend Symbols
This manual is an integral part of the equipment to which it refers and must accompany the equipment in case of sale or change of ownership. Keep it for future reference; ARAG reserves the right to modify the specifications and instructions regarding the product at any time and without prior notice. -
Page 3: Table Of Contents
ContEnts • Legend symbols.......................2 • Manual foreword and use ....................4 • Manual use modes ......................4 • Limitations ........................4 • Responsibility ........................4 1 Risks and protections before assembly ................4 2 Bravo DSB ........................4 3 Intended use ........................5 4 PrecauTIonS ........................5 5 Package content.......................5 6 Position on farming machine ..................6 System recommended composition .................6 Monitor and control unit positioning .................7... -
Page 4: Manual Foreword And Use
RESpONSibiLity The installer must carry out workmanlike installations and ensure to the end user the perfect operation of the whole system both with ARAG components only and other brands' components. ARAG always recommends using its components to install control systems. -
Page 5: Intended Use
• In case of voltaic arc welding, remove connectors from Bravo and disconnect the power cables. • Only use ARAG genuine spare parts and accessories. pAckAgE cONtENt The table below indicates the components that you will find in the Bravo 300S computer package:... -
Page 6: Position On Farming Machine
pOSitiON ON FARMiNg MAchiNE System recommended composition RCU CONNECTION Assembly diagram for crop sprayers with membrane pump Legend: Bravo 300S Battery Filling pump Hydraulic unit Flowmeter Main valve Pressure sensor Control valve Foam marker Speed sensor Filling flowmeter or Pump Protector RPM Sensor or Pump Pro- tector... -
Page 7: Monitor And Control Unit Positioning
Monitor and control unit positioning Bravo 300S must be placed in the control cabin of the farming machine. Observe the following precautions: - DO NOT install the monitor in areas where it would be subjected to excessive vibrations or shocks, to prevent any damage or accidental use of the control keys; - Install the device in a visible position within easy reach by hand;... -
Page 8: Bracket Fixing
Bracket fixing The monitor must be mounted after having fixed the bracket at the desired location (the previous paragraph shows the bracket drilling template). The bracket must be slid out of the monitor seat ( , Fig. 6) and fixed using the supplied screws ( Make sure the bracket is securely mounted, fit the monitor on it, and push it until it locks in place ( Fig. -
Page 9: Control Unit Position
The hydraulic unit must be fixed with the special brackets supplied and fitted to the unit, positioning it as shown in the manual provided with the unit. ARAG IS NOT LIABLE FOR ANY DAMAGE RESULTING FROM THE INSTALLATION BY UNSKILLED PERSONNEL. ANY SYSTEM DAMAGE CAUSED BY A WRONG INSTALLA- TION AND/OR CONNECTION AUTOMATICALLY VOIDS THE WARRANTY. -
Page 10: Power Supply Connection
Power supply connection The package includes the power connector (component 8, Fig. 1) to be connected to the farming machine battery; Fig. 9c shows the drilling template of the power connector. Connect the power connector to the battery wires using two 6-mm faston connectors, as indicated in Figg. -
Page 11: Connecting The Harness To Control Unit, Hydraulic Unit And Available Functions
• Take care not to break, pull, tear or cut the cables. • Use of unsuitable cables not provided by ARAG automatically voids the warranty. • ARAG is not liable for damages to the equipment, persons, animals or things cau- sed by failure to observe the above instructions. - Page 12 Fig. 13 Fix the connectors to the relevant valves according to the initials indicated in your assembly general diagram (Par. 6.1 - System recommended composition). • Remove the protection cap (1, Fig. 13) from the electric valve. • Place the seal (2) onto the connector (3) and push the connector fully on (4): be careful not to bend the contacts upon insertion on the valve.
-
Page 13: Hydraulic Valves Connection
Hydraulic valves connection Bravo 300S can control up to 9 hydraulic functions through double-acting valves. • Fix the connectors to the relevant valves according to the initials indicated in your assembly general diagram (Par. 6.1 - System recommended composition). • Position seal (1) onto connector (2) then connect the latter pressing it fully home (3): during this operation, take care not to bend the electric contacts. -
Page 14: Connection Of Sensors And Other Available Functions
Use ARAG sensors: use of unsuitable sensors not provided by ARAG automatically voids the warranty. ARAG is not liable for damages to the equipment, persons, animals or things caused by failure to observe the above instructions. Item... -
Page 15: Sd Memory Card
All ARAG sensors use the same type of connector. Connect the sensor connector to the relevant harness; make sure it is correctly fitted and push it until locking it. Fig. 15a Fig. 15b SD memory card The SD memory card is used to exchange data with the Bravo 300S computer. -
Page 16: Maintenance / Diagnostics / Repairs
MAiNtENANcE / DiAgNOSticS / REpAiRS - Clean only with a soft wet cloth. - DO NOT use aggressive detergents or products. - DO NOT clean equipment with direct water jets. Troubleshooting The complete version of the troubleshooting section is available on the complete manual, in the CD supplied with the product. - Page 17 Notes...
-
Page 18: Guarantee Terms
1. ARAG s.r.l. guarantees this apparatus for a period of 360 day (1 year) from the date of sale to the client user (date of the goods delivery note). The components of the apparatus, that in the unappealable opinion of ARAG are faulty due to an original defect in the material or production process, will be repaired or replaced free of charge at the nearest Assistance Centre operating at the moment the request for intervention is made. - Page 19 C o n f o r m i t y D e c l a r a t i o n ARAG s.r.l. Via Palladio, 5/A 42048 Rubiera (RE) - Italy P.IVA 01801480359 Dichiara che il prodotto descrizione: Computer modello: Bravo 300S con unità decentrata (Bravo 300S RCU)
- Page 20 ARAG accessories or spare parts to make sure manufacturer guaranteed safety conditions are maintained in time. Always refer to ARAG spare parts catalogue. 42048 RuBieRA (Reggio emilia) - iTALY Via Palladio, 5/A Tel. +39 0522 622011 Fax +39 0522 628944 www.aragnet.com...
Need help?
Do you have a question about the BRAVO 300S Series and is the answer not in the manual?
Questions and answers