Tool Tips - Bosch CSG15 Operating/Safety Instructions Manual

3609929D18_CSG15 10/23/14 1:40 PM Page 11
connector (Fig. 1). The sleeve nozzle
provides the quickest, easiest connection of
the nozzle to the attachment. The snap-in
connector provides a more secured
connection. To use the snap-in connector,
remove the rubber nozzle from the vacuum
hose. Press the snap-in connector into the
dust port until you hear the click.
Dust port adaptors are also available to
connect the Bosch
attachment to any common size vacuum
This tool is intended for surface grinding,
deburring and smoothing mainly mineral
materials such as, for example, concrete,
stone, marble and poured flooring without
the use of water. It also can be used for
removing protective coating and adhesive
residue.
Do not use water or other
cooling fluid with this tool for
grinding. WARNING
Allow the tool to reach full speed before
applying it to the workpiece surface.
If an extension cord is
necessary, a cord with
WARNING
adequate size conductors that is capable of
carrying the current necessary for your
tool must be used. This will prevent
excessive voltage drop, loss of power or
overheating. Grounded tools must use 3-wire
extension cords that have 3-prong plugs and
receptacles.
NOTE: The smaller the gauge number, the
heav i er the cord.
* Wheel guard
* 2-piece Brush ring
* Backing flange
* Dry diamond cup wheel
* Lock nut
* Lock nut wrench*
hose. See Boschtools.com for details.
Always make sure the vacuum cleaner that
you use is designed for extraction of
masonry dust. Bosch provides suitable
vacuum cleaners.
The auxiliary handle is used to guide and
balance the tool. Always use the auxiliary
handle for maximum control and ease of
dust extraction
operation.

Tool Tips

Hold the tool with both hands and apply the
diamond wheel flat on the work surface,
advancing the tool moderately back and
forth.
The dry diamond cup wheel included with the
tool is intended for hard materials.
A dull dry diamond cup wheel can be
sharpened with a abrasive material (e.g.,
chalky sand stone).
Visit boschtools.com for full line of available
diamond cup wheels.
Accessories
-11-
AUXILIARY HANDLE
RECOMMENDED SIZES OF EXTENSION CORDS
120 VOLT ALTERNATING CURRENT TOOLS
Cord Size in A.W.G.
Tool's
Ampere
Cord Length in Feet
Rating
25 50 100 150
3-6 18 16 16
6-8 18 16 14
8-10 18 16 14
10-12 16 16 14
12-16 14 12 —
* Auxiliary handle
* Carrying case
** Vacuum hose
(*= standard equipment)
(**= optional accessories)
Wire Sizes in mm
2
Cord Length in Meters
15 30 60 120
14 0.75 0.75 1.5 2.5
12 0.75 1.0 2.5 4.0
12 0.75 1.0 2.5 4.0
12 1.0 2.5 4.0 —
— — — — —