Cleaning Function - Philips 14PV172/05 Operating Instructions Manual

Tvcr 14pv172/05 b/s

Hide thumbs

Table of Contents

Searching for a tape position

Sometimes you may have recorded two or more

TV programmes on one cassette.

So that you do not have to spend time searching,

your set offers you an automatic search facility.

Every time you start to record, this TV Combi marks

the tape with a code mark. You can search for these

code marks on the tape or unrecorded areas lasting

at least 15 seconds using the

your remote control.

INDEX E

Press the

button.

Press the

button to select the next code

mark or unrecorded area or the

the previous code mark or unrecorded area.

Once the TV Combi finds the code mark or

unrecorded area it will automatically switch to

playback.

Note:

* When you press any tape transport button

(e.g.: the

function will be stopped.

* You cannot use this function with recordings

made on another TV Combi that does not have

this function.

INDEX E

button on

button for

button) this search

How do I eliminate picture interfer-

ence?

Every time a cassette is loaded the TV Combi will

automatically set the correct tracking position.

For recordings made on another set you may be able

to improve on the automatic setting as follows:

During playback press the

remote control. The main menu appears on the

TV screen.

Select 'SPECIAL' and confirm with the

button.

Select 'TRACKING' .

Press the

playback quality is at its best.

Press the

button. This setting will remain

until you remove the cassette.

Note:

* Some hired cassettes may have a poor pic-

ture/sound quality. This is not a fault in your set.