Enabling A Device - Siemens SINUMERIK Series Operating Manual

Easy Extend

21.2 Enabling a device

21.2 Enabling a device
The available device options may be protected by a password.
Procedure
892
Machine manufacturer
Please observe the information provided by the machine manufacturer.
1. Select the "Parameter" operating area.
2. Press the menu forward key and then the "Easy Extend" softkey.
A list of the connected devices is displayed.
3. Press the "Enable function" softkey.
The "Enabling of the Devices Option" window opens.
4. Enter the option code and press the "OK" softkey.
A tick appears in the appropriate checkbox in the "Function" column and
the function is enabled.
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Milling