Updating Firmware; Maintenance - dji RONIN-S User Manual

Updating Firmware

Download the DJI Pro Assistant for Ronin and update the firmware if there is new firmware
released for Ronin-S. Follow the steps below to update the firmware:
1. Connect the Ronin-S to your computer via the USB-C Cable.
2. Click "Upgrade" and wait for the download to finish.
3. Click "Upgrade" again and then click "Confirm".
4. Power the Ronin-S off and then on after the update is complete.
Ensure that your computer is connected to the Internet.
Do not disconnect the USB cable during the update.
If the firmware update fails, restart the Ronin-S and retry.

Maintenance

The Ronin-S is a precise machine, and its power/data ports are not waterproof. Be sure
to protect them from dust and water during use. After use, it is recommended to wipe the
Ronin-S down with a soft dry cloth. Never spray any cleaning liquids onto the Ronin-S.
30
©
2019 DJI OSMO All Rights Reserved.