Philips CE130/51 Quick Start Manual

Register your product and get support at
EN Quick Start Guide
RU Краткое руководство
d
e
f
1
2
CE130
What's in the box
Main unit Carrying case
(with a sleeve) (includes the front panel)
Rubber cushion Screws x 4 pcs Disassembly tools x 2 pcs
Connect wires
a a a
b
c
d
a
b
b b
c
d
e
c
f c
g
h
d
d
L
Rear Front
R
Turn on
1
Press to turn on the unit.
• To turn off the unit, press for over 3 seconds.
Set clock
1
Press MENU .
2
Press / repeatedly until the current time is displayed.
3
Rotate clockwise to set hour.
4
Press to confi rm.
5
Rotate counterclockwise to set minute.
6
Press to confi rm.
Listen to radio
1
Press SOURCE repeatedly to select radio mode.
2
Press BAND / to select band: [FM1] , [FM2] , [FM3] , [AW1] or [AW2] .
3
Press or to tune to a radio station manually.
The radio station is broadcast.
»
» To search for a radio station automatically, press
Store stations automatically
1
Press OPTIONS repeatedly until [AUTO-STORE] displays.
2
Press to confi rm.
» The six strongest stations of the selected band are saved in preset channel automatically.
Store stations manually
1
Tune to a station that you want to store. (see 'Tune to a preset station' on page 13 )
2
Press and hold +/PRESET or -/RRESET to enter storing mode.
» The preset number starts to blink..
3
Press +/PRESET or -/RRESET to select radio channel.
4
Press to confi rm.
The station is saved in the selected channel.
»
» The preset number on LCD screen lights up and remains on.
Trim plate ISO male connector
User manual Quick start guide
1
Connect the supplied male connector to the unit.
2
Check the car's wiring carefully and connect them
to the supplied male connector.
1 Green/black Left speaker (Rear)
strip
2 White/black Left speaker (Front)
strip
3 Gray/black strip Right speaker (Front)
4 Purple/black Right speaker (Rear)
strip
e Red Ignition key +12V DC when
ON/ACC
f Blue Motor/electric antenna relay
control lead/Amplifi er relay
control lead
g
Black Ground
h Yellow To the +12V car battery which
is energized at all times
3
Connect the antenna and amplifi er as illustrated, if
applicable.
or for over 3 seconds.
Mount into the dashboard
a
b
c
Play from USB
1
Slide the USB socket cover marked to the left.
2
Insert the USB device into the USB socket.
» The unit starts to play from the USB device automatically.
Insert a card
1
Press to release the panel.
2
Push the left side of the panel rightward, then pull the panel
towards you to disengage it from the chassis.
3
Insert the card into the card slot.
» The unit starts playing from the card automatically.
Reset
You can reset the unit to its default setting.
1
Detach the front panel.
2
Press the reset button by using a ball-point pen or a similar tool.
» Preset adjustments such as preset channels and sound
adjustments are erased.
53mm
RESET