Advertisement
Quick Links
CHAIN REACTION CYCLES PRO BIKE BAG INSTRUCTIONS
1
Remove the pedals from your bike and
place them into pocket A as shown.
4A
Select an appropriate CPI and fit these in place of your hubs using QR levers or bolt through
axles as required to fix them in place as you would a normal wheel/hub.
6A
Undo the straps on the front and rear shock blocks so they are ready to accept the bike.
2
Turn your bike upside down (be careful
not to damage your saddle or scratch
your controls or bars).
4B
6B
3
Remove the wheels and set them aside
for now.
5
Fit your rear wheel into the pocket in the
back wall of the bag.
7A
Turn your bike up the right way
and position the CPI's on top of the
appropriate shock block.
Advertisement
Summary of Contents for CRC PRO BIKE BAG
- Page 1 CHAIN REACTION CYCLES PRO BIKE BAG INSTRUCTIONS Remove the pedals from your bike and Turn your bike upside down (be careful Remove the wheels and set them aside place them into pocket A as shown. not to damage your saddle or scratch for now.
- Page 2 Adjust the position of the blocks if Strap your frame to the back of the Adjust the position of the middle shock needed and secure the CPI’s in place bag/wheel pocket. You may also need block so it is directly under the bottom using the straps.
Need help?
Do you have a question about the PRO BIKE BAG and is the answer not in the manual?
Questions and answers