Table of Contents
Advertisement
Set up a VPN connection
A virtual private network (VPN) lets you use the Internet to securely access your network
when you aren't home.
This type of VPN access is called a client-to-gateway tunnel. The computer is the client,
and the router is the gateway. To use the VPN feature, you must log in to the router and
enable VPN, and you must install and run VPN client software on the computer.
VPN uses DDNS or a static IP address to connect with your router.
To use a DDNS service, register for an account with a host name (sometimes called a
domain name). You use the host name to access your network. The router supports
these accounts: NETGEAR, No-IP, and Dyn.
If your Internet service provider (ISP) assigned a static WAN IP address (such as 50.196.x.x
or 10.x.x.x) that never changes to your Internet account, the VPN can use that IP address
to connect to your home network.
Specify VPN Service in the Router
You must specify the VPN service settings in the router before you can use a VPN
connection.
To specify the VPN service:
1. Launch a web browser from a computer or mobile device that is connected to your
mesh network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > VPN Service.
The VPN Service page displays.
5. Select the Enable VPN Service check box.
By default, the VPN uses the UDP service type and uses port 12974. If you want to
customize the service type and port, we recommend that you change these settings
before you install the OpenVPN software.
Use VPN to Access Your Network
Nighthawk Mesh WiFi 6 System
103
User Manual
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Nighthawk Mesh WiFi 6 System and is the answer not in the manual?
Questions and answers
how do i connect directly to satellite wifi mesh routers to turn them into access points.
The setup process for the NETGEAR Nighthawk Mesh WiFi 6 System involves syncing the satellite routers with the main router. Follow these steps:
1. Sync the Satellite: Ensure your satellite router is powered on and within range of the main router. The router should automatically detect and sync with the satellite.
2. Use the App: Follow the instructions on the NETGEAR app to complete the setup.
3. Personalize Settings: Use your existing Wi-Fi network name and password for seamless device connection.
4. Firmware Update: If a new firmware version is available, update it to ensure the latest security and performance improvements.
5. Placement: Position satellites halfway between the main router and areas with weak Wi-Fi signals to optimize coverage.
If you need the system to work as access points, additional configuration may be required. Contact NETGEAR support for guidance on setting up the system in access point mode.
This answer is automatically generated