Troubleshooting; Warranty - DeWalt DXAM-2260 User Manual

TROUBLESHOOTING

unplug before any disassembly or servicing.
WARNING:
All disassembly and repairs should be
WARNING:
performed by quali ed personnel.
Minor problems often can be fixed without calling customer service.
PROBLEM CAUSE
1. No power to unit.
Unit will not run. 2. Switch not on.
3. Circuit breaker tripped.
1. Unit has been severely
Unit runs but Air
jolted causing blower
Mover makes
wheel to rub against
loud scraping
housing or housing to
noise.
deform.
1. Dirt build up on one side
Unit runs but
of Air Mover blower wheel.
vibrates
2. Severe jolt has bent
excessively.
motor shaft.
Unit runs but
1. Blower wheel is jammed
blower wheel
against housing.
does not turn.
1. Intake grille and /or
exhaust grille is
Unit runs brie y,
obstructed.
then shuts off
2. Motor bearings are failing
on overload.
or motor has developed
an internal electrical fault.
WARNING: If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
SOLUTION
1. Plug unit in. Check circuit breaker.
2. Place in "ON" position.
3. Reset circuit breaker.
1. Contact customer service.
1. Clean blower wheel blades.
2. Contact customer service.
1. Contact customer service.
1. Remove obstruction.
2. Contact customer service.

WARRANTY

Alton Industry Ltd. Group
3 year Limited Warranty
This warranty covers any defects in materials or workmanship of the enclosed
product. Alton Industry Ltd. Group will repair or replace any defectivematerials due to
craftsmanship of the product. This warranty does not cover any problem caused by
misuse, abuse, accidents or acts ofGod, such as floods or hurricanes. Consequential
and incidental damages are not covered under this warranty. Coverage terminates if
you sell or otherwise transfer the ownership. If you feel you have a defective product,
please submit a copy of your receipt to the address below and call 1-888-899-0146
for instructions prior returning this itemto the store or sending back to:
Alton Industry Ltd.Group
1031 NorthRaddantRd
Batavia, Illinois 60510
We will inspect the product and contact you within 72 hours to give you the results of
our inspection. We reserve the right to repair or replace the product at our discretion.
However,wemay replace the productwith one of similar but not exact features.
Parts and Service Information available callAlton Industry at 1-888-899-0146.
This warranty gives you specific legal rights. You may have other rights
which vary from state to state.
Copyright © 2018 D WALT.
E
D WALT and the D WALT Logo are trademarks of the D
®
E E
under license.
The yellow/black color scheme is a trademark for D
Copyright © 2018 D WALT.
E
D WALT ® y el logotipo de DeWALT son marcas comerciales de D
E
usan bajo licencia.
El gráfico de color negro y amarillo es una marca registrada para las herramientas eléctricas y los accesorios de
D WALT.
E
Copyright © 2018 D WALT.
E
D WALT et le logo D WALT sont des marques de commerce de D
®
E E
cette dernière et sont utilisés sous licence.
L'agencement de couleurs jaune et noir est une marque de commerce des outlils électriques et accessorires
D WALT.
E
8
WALT Industrial Tool Co., or an affiliate thereof and are used
E
WALT power tools & accessories.
E
WALT Industrial Tool Co., o una filial del mismo y se
E
WALT Industrial Tool Co. ou d'une société affiliée à
E