Cleaning Recommendations - Braun Oral-B PRO 6000 Manual

We do not recommend using the Oral-B
«FlossAction» or Oral-B «3D White» brush head
with braces. You may use the Oral-B «Ortho»
brush head, specifically designed to clean
around braces and wires.
Connecting your
toothbrush to your
Smartphone
The Oral-B™ App is available for mobile
devices running iOS or Android operating
systems. It can be downloaded for free from
App Store or Google Play™.
SM
Your handle has a sensor installed that, together
with a «position detection» feature in the app,
helps you to detect what areas to brush and for
how long so you will never miss a zone. Use it
along with your smartphone holder (find details
under «Accessories - Smartphone Holder»).
Furthermore, the Oral-B™ App gives you the
opportunity to chart your brushing progress and
customize your toothbrush settings (for many
more benefits see the Oral-B™ App instructions).
• Start the Oral-B™ App. It will guide you
through the entire Bluetooth pairing
procedure.
Note: Oral-B™ App functionality is limited if
Bluetooth wireless technology is deactivated
on your smartphone (for directions please
refer to your smartphone's user manual).
• Any app instructions will be displayed on
your smartphone.
• If Bluetooth wireless technology is activated
on your handle, the Bluetooth symbol on the
radio transmission display (7) illuminates.
Once the handle is paired, the Smart Ring
(2) flashes briefly.
• Keep your smartphone in close proximity
(within 5m/16ft distance) when using it with
the handle. Make sure the smartphone is
safely positioned in a dry place.
Note: Your smartphone must support Bluetooth
4.0 (or higher)/Bluetooth Smart in order to pair
your handle.
Compatible smartphones are listed in App
Store or Google Play™.
(SM)
Caution: Follow your smartphone's user manual
to ensure your phone/charger is designed for
use in a bathroom environment.
10
Cleaning
recommendations
After brushing, rinse your brush head under
running water with the handle switched on.
Switch off and remove the brush head. Clean
handle and brush head separately; wipe them
dry before reassembling. Unplug the basic
charger/charging stand before cleaning. Brush
head holder (10), brush head compartment and
protective cover (11) and removable travel case
inlays (12e) are dishwasher-safe.
To be cleaned with a damp cloth only:
Basic charger (9), charging stand (14), charging
travel case (12), basic travel case (17), travel
case (16), power cord (13), smartphone holder
(15) (picture ➄).
Accessories
(depending on model)
Smartphone Holder
Before each use, make sure mirror, suction cup
surface (15d) and holding brackets (15a) are
always clean and dry (picture C1). Use a
fuzz-free cloth for cleaning suction cup surface
and mirror. In particular make sure suction cup
surface and mirror are free from any
contamination (e.g. hair, dust, oil, fuzz, dirt etc.).
• Press your smartphone holder (15) just with
enough pressure, centered at nose level on
a sturdy mirror. Then mount the holder by
pressing the lever arm (15b) towards the
mirror until it snaps in (picture C2).
Note: Only affix on mirror to ensure safe and
correct conditions. For use in bathroom
only. Do not use in automobiles.
• Always make sure the smartphone holder is
securely mounted on the mirror before
inserting your smartphone. Place your
smartphone (portrait) sideways in between the
holding brackets (15a) by pressing against one
bracket with your phone and sliding the other
bracket to the side (picture C3). Follow the
same procedure to remove your phone again.
• Adjust the overall position for the required
angle by moving the ball joint of the holder
(picture C4).
• Once done, remove your phone from the
holder. Take off the smartphone holder by