Specs - Moza AirCross 2 User Manual

Upgrade via App:
a.Turn off the gimbal.
b.Long press the center button, then press the power button with the
other hand until the prompt 'Boot Mode' appears on the screen.
c.Start App, press Bluetooth to search for AirCross 2 device and
connect.
d.The App will automatically enter the firmware upgrade interface,
please wait for the firmware download to complete, press the
'upgrade' button and wait for about 5 minutes.
e.Restart the gimbal after the upgrade.
Note:
Make sure the gimbal is fully charged and the computer or mobile phone network
connection is normal during the upgrade.
Do not disconnect the gimbal from power, USB cable or Bluetooth during the
upgrade, otherwise the upgrade will fail.
Please re-install the batteries and try to upgrade again until the upgrade is
completed.

Specs

Body weight (g)
Payload (g)
Dimension (mm)
Camera Tray Dimension
(mm)
Mechanical Endpoint
Range (°）
Operation Temperature
（℃）
Operation Voltage
Operation Current
Battery
Connections
Specs
Battery excluded
Minimum
Maximum
Storage dimension
Release center to roll axis
Release center to tilt axis
Release center to the peak of tilt
Pan
Roll
Tilt
Lowest
Highest
Standard
Dynamic (mA)
Model
Type
Standard capacity (mAh)
Standard voltage (V)
Charging time (H)
Battery life (H)
Bluetooth
2.4G
USB in
Camera control port
Accessory extension ports
17
950
300
3200
360*220*100
120
125
75
360°continuous
360°continuous
360°continuous
0
50
7.4
200
M2S30QB
Li -ion
3000
7.4
1.5
12
4.0 BLE
50m
USB -C
Mini USB 10PIN
Multi-CAN*3