Safety Tips; Operation Instructions; Technical Specification; Dmx Control - Big Dipper LP009 User Manual

R
LED Par Light User's Manual
Model:LP009(With Amber)
Big Dipper
Attention
1.Please read these operating instructions carefully to familiarize you with basic operations of this unit
BEFORE USE.
2.Without permitted, it is prohibited to spread the contents of this manual to others.
3.This manual is only to provide related information, and the contents of this manual will be changed at
any time without notice.
4.Unless the instructions have already stated, please do not freely modified the unit.

Safety Tips

1. Before installation and maintenance, please confirm the power is OFF. make sure that the ventilation
around the unit is good.
2.The lighting is designed for indoor demonstration, please do not use this product in a wet environment
for long-term.
3.The use and maintenance of this unit should avoid contact with water. when using it outdoor, please take
waterproofing measures.
4.Personnel, who to take the installation, operation and maintenance, must be familiar with the lighting
performance. Most of the damage is resulted from unfamiliar with its performance.
5.Please do not face up to the luminous unit for a long time, so as not to cause discomfort to your eyes.
6.Please often wipe the unit with a clean cloth.

Operation Instructions

Iten NO. Display Description (all the funtions needed, want to active, should press Button "D" to save.)
1 d001 DMX Address,(001-512) B、C button to plus or minus the numerical code.
2 P000 colorful jump, (00-255) the button B and C for adjusting the change speed.
3 L000 colorful fade, (00-255) the button B、C to adjust the change speed.
4 E000 colorful vein banding, (00-255) the button B、C to adjust the change speed.
5 soud
colorful sound-active.
Safety guide
6 r000 Red-selecting, (000-255) Button B、C to adjust the brightness.
7 g000 Green-selecting, (000-255) Button B、C to adjust the brightness.
Safety guide
8 b000 Blue-selecting, (000-255) Button B、C to adjust the brightness.
9 U000 White-selecting, (000-255) Button B、C to adjust the brightness.
10 Y000 Amber-selecting, (000-255) Button B、C to adjust the brightness.
11 F000 Strobe, (000-255) Button B、C to adjust flicker frequency.
Instruction of buttons
Button A: Function button; Button B: to increase; Button C: to decrease; Button D: to save
Operation Instructions: Press Button A will active 11 kinds of different functions. The digit in
front of decimal point on the nixie tube indicates the present function. The digit behind the
decimal point indicates the function corresponds to the parameter.
Operating Instructions Safety guide

Technical Specification

Model
54x3W(R12 G12 B12 W12 A6)
Light source
Source lifetime 50,000hours
Power supply
100-240V/50-60HZ
Rating power
180W
Play mode
Auto/Sound/DMX/Master-slave

DMX Control

（Last radix point flickers on digital display board when has DMX signal）
Function
Item NO.
R G B W A total dimming, linear dimming, from dark to bright
CH 1 Dimming
CH 2 Strobe speed from slow to fast
Strobe
0-50:strobe and linear dimming; 51-100: jump-change;
CH 3 Function-selecting
101-150: fade change; 151-200: vein banding; 201-255: Sound
Function speed Corresponding CH 3 function speed, from slow to fast
CH 4
CH 5 R-Dimming Red color dimming, linear dimming, from dark to bright
G-Dimming Green color dimming, linear dimming, from dark to bright
CH 6
CH 7 B-Dimming BLue color dimming, linear dimming, from dark to bright
CH 8 W-Dimming White color dimming, linear dimming, from dark to bright
CH 9 A-Dimming Yellow color dimming, linear dimming, from dark to bright
L P009(Amber)
9
DMX channel
colorful change, strobe
Effect
255*255*295mm
Dimensions
N.W./G.W. 2.25KG /3KG
Standard configuration
Power Cable
Instruction
Big Dipper Laser Science And Technology Co., Ltd